[GELÖST] - HD+ 1843 ERROR (no entitlements)

boesl · Beitrag von **boesl** » Mi 14. Mär 2012, 01:03

Hy,

habe auf dem Server ORF & Sky DE laufen, beide mit nem Smargo.
Nun möchte ich mit einem 3ten Smargo ene HD+ (CAID 1843) zum Laufen bekommen, allerdings funktioniert dies nicht so ganz.

Hier meine oscam.server:

Code: Alles auswählen

[reader]
label                         = orf
protocol                      = smartreader
device                        = Serial:Reader BCEDDCE
services                      = ...
caid                          = 0D05
ecmwhitelist                  = 0D05:9C
detect                        = cd
mhz                           = 369
cardmhz                       = 368
ident                         = 0D05:000004,000010
group                         = 1
emmcache                      = 1,3,2
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-g                    = 1
lb_weight                     = 300

[reader]
label                         = skyde
protocol                      = smartreader
device                        = Serial:Reader 0
services                      = ...
caid                          = 1702
boxkey                        = 1122334455667788
ecmwhitelist                  = 1702:93;1833:89
detect                        = cd
mhz                           = 961
cardmhz                       = 600
ident                         = 1702:000000
group                         = 1
emmcache                      = 1,3,2
blockemm-unknown              = 1
blockemm-u                    = 1
lb_weight                     = 300

[reader]
label                         = hd_plus
protocol                      = smartreader
device                        = Serial:Reader 9D70258
services                      = hdplus
caid                          = 1843
rsakey                        = BF...D5
boxkey                        = A7...7C
ecmwhitelist                  = 1843:89
detect                        = cd
mhz                           = 368
cardmhz                       = 368
ident                         = 1843:000000,003411,008011
group                         = 1
emmcache                      = 1,3,2
lb_weight                     = 300

& die oscam.log:

Code: Alles auswählen

2012/03/14 00:53:02 81A2200 h restarting reader hd_plus 
2012/03/14 00:53:02 81A2200 h creating thread for device Serial:Reader 9D70258 
2012/03/14 00:53:02 83A9C68 r Using 0x82 as endpoint for smartreader hardware detection 
2012/03/14 00:53:02 83A9C68 r Found reader with serial Reader 9D70258 at 004:002 
2012/03/14 00:53:02 83A9C68 r Found smartreader device Serial:Reader 9D70258 
2012/03/14 00:53:02 83A9C68 r reader hd_plus initialized (device=Serial:Reader 9D70258, detect=cd, mhz=369, cardmhz=368) 
2012/03/14 00:53:03 83A9C68 r hd_plus card detected
2012/03/14 00:53:06 83A9C68 r ATR: 3F ... 28 
2012/03/14 00:53:06 83A9C68 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz 
2012/03/14 00:53:08 83A9C68 r detect native nagra card 
2012/03/14 00:53:16 83A9C68 r card system not supported 
2012/03/14 00:53:16 83A9C68 r Normal mode failed, reverting to Deprecated Mode 
2012/03/14 00:53:20 83A9C68 r ATR: 3F ... 28 
2012/03/14 00:53:20 83A9C68 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz 
2012/03/14 00:53:22 83A9C68 r detect native nagra card 
2012/03/14 00:53:30 83A9C68 r card system not supported 
2012/03/14 00:53:30 83A9C68 r card initializing error

Kommt die HD+ mit dem Smartreader - Protokoll nicht klar? Sollte ich hier auf mouse umstellen? Wollte ich probieren, allerdings werden die smargos nicht auf /dev/ttyUSB eingebunden, warum auch immer.

Code: Alles auswählen

root@IPC ~ > ls -l /dev/ttyUSB*
ls: Zugriff auf /dev/ttyUSB* nicht möglich: Datei oder Verzeichnis nicht gefunden

Beitrag von **feissmaik** » Mi 14. Mär 2012, 10:45

...wird auch schon im DEB diskutiert -> http://www.digital-eliteboard.com/showt ... lements%29
achte zb auf das was razorback dir rät und teste es vllt auch mal mit der STABLE tags1.10

Ansonsten: Das smartreader Protokoll ist nicht immer das optimale... Probier stattdessen halt mal das "mouse" und nutz udev
Und wie deine Reader konfiguriert sind spielt auch eine gewisse Rolle

Smargos werden mit sicherheit auf /dev/ttyUSB* eingebunden, ist dabei aber eben nur die Sache das die durcheinander gewürfelt werden nach reboot etc - deshalb auch udev .. Siehe dazu: USB Reader einen festen /dev/ Port zuweisen

boesl · Beitrag von **boesl** » Mi 14. Mär 2012, 11:06

hy,

Problem gelöst, hab einfach Smargos gewechselt, damit hauts nun hin.
Nunja, anscheinend bekomme ich auf /dev/ttyUSB* nichts eingebunden wie's aussieht, könnte das sein?

mit udev hab ich's ja schon probiert gehabt, da hat der oscam Restart nicht funktioniert, da hat er die Reader nicht mehr gefunden.

Aber nachdem es ja nun läuft, hoffe ich dass es so bleibt

danke auf jeden Fall!

Beitrag von **feissmaik** » Mi 14. Mär 2012, 11:12

Guck mal bitte in dmesg rein, da steht welchem ttyUSB das Device zugewiesen wurde

wenn du es schon mit udev probiert hast könnte man vermuten das du da irgendwas vermurkst hast - udev hat nichts damit zu tun ob OScam restart geht oder ob er die Karten findet sofern das zu öffnende device in der oscam.server passt; warscheinlich haste dort vergessen den in udev neu zugewiesenen /dev/ port anzupassen?

ansonsten poste mal bitte deine udev konfiguration

boesl · Beitrag von **boesl** » Mi 14. Mär 2012, 20:39

dmseg

Code: Alles auswählen

00:51:12 14.03.2012] Initializing cgroup subsys cpuset
[00:51:12 14.03.2012] Initializing cgroup subsys cpu
[00:51:12 14.03.2012] Linux version 2.6.32-5-486 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Mon Jan 16 15:32:33 UTC 2012
[00:51:12 14.03.2012] KERNEL supported cpus:
[00:51:12 14.03.2012] Intel GenuineIntel
[00:51:12 14.03.2012] AMD AuthenticAMD
[00:51:12 14.03.2012] NSC Geode by NSC
[00:51:12 14.03.2012] Cyrix CyrixInstead
[00:51:12 14.03.2012] Centaur CentaurHauls
[00:51:12 14.03.2012] Transmeta GenuineTMx86
[00:51:12 14.03.2012] Transmeta TransmetaCPU
[00:51:12 14.03.2012] UMC UMC UMC UMC
[00:51:12 14.03.2012] BIOS-provided physical RAM map:
[00:51:12 14.03.2012] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[00:51:12 14.03.2012] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[00:51:12 14.03.2012] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[00:51:12 14.03.2012] BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
[00:51:12 14.03.2012] BIOS-e820: 000000000eff0000 - 000000000effffc0 (ACPI data)
[00:51:12 14.03.2012] BIOS-e820: 000000000effffc0 - 000000000f000000 (ACPI NVS)
[00:51:12 14.03.2012] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[00:51:12 14.03.2012] DMI 2.3 present.
[00:51:12 14.03.2012] last_pfn = 0xeff0 max_arch_pfn = 0x100000
[00:51:12 14.03.2012] initial memory mapped : 0 - 01800000
[00:51:12 14.03.2012] init_memory_mapping: 0000000000000000-000000000eff0000
[00:51:12 14.03.2012] 0000000000 - 0000400000 page 4k
[00:51:12 14.03.2012] 0000400000 - 000ec00000 page 2M
[00:51:12 14.03.2012] 000ec00000 - 000eff0000 page 4k
[00:51:12 14.03.2012] kernel direct mapping tables up to eff0000 @ 7000-c000
[00:51:12 14.03.2012] RAMDISK: 0abe0000 - 0b4335f3
[00:51:12 14.03.2012] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
[00:51:12 14.03.2012] 0MB HIGHMEM available.
[00:51:12 14.03.2012] 239MB LOWMEM available.
[00:51:12 14.03.2012] mapped low ram: 0 - 0eff0000
[00:51:12 14.03.2012] low ram: 0 - 0eff0000
[00:51:12 14.03.2012] node 0 low ram: 00000000 - 0eff0000
[00:51:12 14.03.2012] node 0 bootmap 00001000 - 00002e00
[00:51:12 14.03.2012] (7 early reservations) ==> bootmem [0000000000 - 000eff0000]
[00:51:12 14.03.2012] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[00:51:12 14.03.2012] #1 [0001000000 - 0001453a90] TEXT DATA BSS ==> [0001000000 - 0001453a90]
[00:51:12 14.03.2012] #2 [000abe0000 - 000b4335f3] RAMDISK ==> [000abe0000 - 000b4335f3]
[00:51:12 14.03.2012] #3 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[00:51:12 14.03.2012] #4 [0001454000 - 000145a194] BRK ==> [0001454000 - 000145a194]
[00:51:12 14.03.2012] #5 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[00:51:12 14.03.2012] #6 [0000001000 - 0000003000] BOOTMAP ==> [0000001000 - 0000003000]
[00:51:12 14.03.2012] Zone PFN ranges:
[00:51:12 14.03.2012] DMA 0x00000000 -> 0x00001000
[00:51:12 14.03.2012] Normal 0x00001000 -> 0x0000eff0
[00:51:12 14.03.2012] HighMem 0x0000eff0 -> 0x0000eff0
[00:51:12 14.03.2012] Movable zone start PFN for each node
[00:51:12 14.03.2012] early_node_map[2] active PFN ranges
[00:51:12 14.03.2012] 0: 0x00000000 -> 0x0000009d
[00:51:12 14.03.2012] 0: 0x00000100 -> 0x0000eff0
[00:51:12 14.03.2012] On node 0 totalpages: 61325
[00:51:12 14.03.2012] free_area_init_node: node 0, pgdat c1360c54, node_mem_map c145c000
[00:51:12 14.03.2012] DMA zone: 32 pages used for memmap
[00:51:12 14.03.2012] DMA zone: 0 pages reserved
[00:51:12 14.03.2012] DMA zone: 3965 pages, LIFO batch:0
[00:51:12 14.03.2012] Normal zone: 448 pages used for memmap
[00:51:12 14.03.2012] Normal zone: 56880 pages, LIFO batch:15
[00:51:12 14.03.2012] Using APIC driver default
[00:51:12 14.03.2012] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[00:51:12 14.03.2012] No local APIC present or hardware disabled
[00:51:12 14.03.2012] APIC: disable apic facility
[00:51:12 14.03.2012] nr_irqs_gsi: 16
[00:51:12 14.03.2012] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[00:51:12 14.03.2012] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[00:51:12 14.03.2012] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[00:51:12 14.03.2012] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[00:51:12 14.03.2012] Allocating PCI resources starting at f000000 (gap: f000000:f0f80000)
[00:51:12 14.03.2012] Booting paravirtualized kernel on bare hardware
[00:51:12 14.03.2012] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60845
[00:51:12 14.03.2012] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-486 root=UUID=524133e8-6450-41e8-9801-61db331e24eb ro quiet
[00:51:12 14.03.2012] PID hash table entries: 1024 (order: 0, 4096 bytes)
[00:51:12 14.03.2012] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[00:51:12 14.03.2012] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[00:51:12 14.03.2012] Initializing CPU#0
[00:51:12 14.03.2012] Initializing HighMem for node 0 (00000000:00000000)
[00:51:12 14.03.2012] Memory: 229980k/245696k available (2341k kernel code, 15132k reserved, 1145k data, 444k init, 0k highmem)
[00:51:12 14.03.2012] virtual kernel memory layout:
[00:51:12 14.03.2012] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[00:51:12 14.03.2012] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[00:51:12 14.03.2012] vmalloc : 0xcf7f0000 - 0xff7fe000 ( 768 MB)
[00:51:12 14.03.2012] lowmem : 0xc0000000 - 0xceff0000 ( 239 MB)
[00:51:12 14.03.2012] .init : 0xc1368000 - 0xc13d7000 ( 444 kB)
[00:51:12 14.03.2012] .data : 0xc12497dd - 0xc1367c84 (1145 kB)
[00:51:12 14.03.2012] .text : 0xc1000000 - 0xc12497dd (2341 kB)
[00:51:12 14.03.2012] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[00:51:12 14.03.2012] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[00:51:12 14.03.2012] Hierarchical RCU implementation.
[00:51:12 14.03.2012] NR_IRQS:288
[00:51:12 14.03.2012] Console: colour VGA+ 80x25
[00:51:12 14.03.2012] console [tty0] enabled
[00:51:12 14.03.2012] Fast TSC calibration failed
[00:51:12 14.03.2012] TSC: Using PIT calibration value
[00:51:12 14.03.2012] Detected 799.931 MHz processor.
[00:51:12 14.03.2012] Calibrating delay loop (skipped), value calculated using timer frequency.. 1599.86 BogoMIPS (lpj=3199724)
[00:51:12 14.03.2012] Security Framework initialized
[00:51:12 14.03.2012] SELinux: Disabled at boot.
[00:51:12 14.03.2012] Mount-cache hash table entries: 512
[00:51:12 14.03.2012] Initializing cgroup subsys ns
[00:51:12 14.03.2012] Initializing cgroup subsys cpuacct
[00:51:12 14.03.2012] Initializing cgroup subsys devices
[00:51:12 14.03.2012] Initializing cgroup subsys freezer
[00:51:12 14.03.2012] Initializing cgroup subsys net_cls
[00:51:12 14.03.2012] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (32 bytes/line)
[00:51:12 14.03.2012] CPU: L2 Cache: 512K (128 bytes/line)
[00:51:12 14.03.2012] CPU: Processor revision 1.5.0.2, 800 MHz
[00:51:12 14.03.2012] CPU: Code Morphing Software revision 4.4.3-10-184
[00:51:12 14.03.2012] CPU: 20030618 15:27 official release 4.4.3#1
[00:51:12 14.03.2012] CPU serial number disabled.
[00:51:12 14.03.2012] CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 stepping 03
[00:51:12 14.03.2012] Checking 'hlt' instruction... OK.
[00:51:12 14.03.2012] devtmpfs: initialized
[00:51:12 14.03.2012] regulator: core version 0.5
[00:51:12 14.03.2012] NET: Registered protocol family 16
[00:51:12 14.03.2012] EISA bus registered
[00:51:12 14.03.2012] PCI: PCI BIOS revision 2.10 entry at 0xe8684, last bus=0
[00:51:12 14.03.2012] PCI: Using configuration type 1 for base access
[00:51:12 14.03.2012] bio: create slab at 0
[00:51:12 14.03.2012] ACPI: Interpreter disabled.
[00:51:12 14.03.2012] vgaarb: loaded
[00:51:12 14.03.2012] PCI: Probing PCI hardware
[00:51:12 14.03.2012] PCI: Probing PCI hardware (bus 00)
[00:51:12 14.03.2012] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0100000-0xf01fffff]
[00:51:12 14.03.2012] pci 0000:00:09.0: reg 10 32bit mmio pref: [0xb0000000-0xbfffffff]
[00:51:12 14.03.2012] pci 0000:00:09.0: reg 14 32bit mmio: [0xf0000000-0xf003ffff]
[00:51:12 14.03.2012] pci 0000:00:09.0: reg 18 io port: [0xe000-0xe07f]
[00:51:12 14.03.2012] pci 0000:00:09.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[00:51:12 14.03.2012] pci 0000:00:09.0: supports D1 D2
[00:51:12 14.03.2012] pci 0000:00:0b.0: reg 10 32bit mmio: [0xf0200000-0xf0200fff]
[00:51:12 14.03.2012] pci 0000:00:0b.0: supports D1 D2
[00:51:12 14.03.2012] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
[00:51:12 14.03.2012] pci 0000:00:0b.0: PME# disabled
[00:51:12 14.03.2012] pci 0000:00:0b.1: reg 10 32bit mmio: [0xf0201000-0xf0201fff]
[00:51:12 14.03.2012] pci 0000:00:0b.1: supports D1 D2
[00:51:12 14.03.2012] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot
[00:51:12 14.03.2012] pci 0000:00:0b.1: PME# disabled
[00:51:12 14.03.2012] pci 0000:00:0b.2: reg 10 32bit mmio: [0xf0202000-0xf02020ff]
[00:51:12 14.03.2012] pci 0000:00:0b.2: supports D1 D2
[00:51:12 14.03.2012] pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot
[00:51:12 14.03.2012] pci 0000:00:0b.2: PME# disabled
[00:51:12 14.03.2012] pci 0000:00:10.0: reg 20 io port: [0x1200-0x121f]
[00:51:12 14.03.2012] pci 0000:00:10.0: supports D1 D2
[00:51:12 14.03.2012] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[00:51:12 14.03.2012] pci 0000:00:10.0: PME# disabled
[00:51:12 14.03.2012] pci 0000:00:10.1: reg 20 io port: [0x1220-0x123f]
[00:51:12 14.03.2012] pci 0000:00:10.1: supports D1 D2
[00:51:12 14.03.2012] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[00:51:12 14.03.2012] pci 0000:00:10.1: PME# disabled
[00:51:12 14.03.2012] pci 0000:00:10.2: reg 20 io port: [0x1240-0x125f]
[00:51:12 14.03.2012] pci 0000:00:10.2: supports D1 D2
[00:51:12 14.03.2012] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[00:51:12 14.03.2012] pci 0000:00:10.2: PME# disabled
[00:51:12 14.03.2012] HPET not enabled in BIOS. You might try hpet=force boot option
[00:51:12 14.03.2012] pci 0000:00:11.0: quirk: region 1000-107f claimed by vt8235 PM
[00:51:12 14.03.2012] pci 0000:00:11.0: quirk: region 1400-140f claimed by vt8235 SMB
[00:51:12 14.03.2012] pci 0000:00:11.1: reg 20 io port: [0x1100-0x110f]
[00:51:12 14.03.2012] pci 0000:00:11.5: reg 10 io port: [0xe100-0xe1ff]
[00:51:12 14.03.2012] pci 0000:00:11.5: supports D1 D2
[00:51:12 14.03.2012] pci 0000:00:12.0: reg 10 io port: [0xe200-0xe2ff]
[00:51:12 14.03.2012] pci 0000:00:12.0: reg 14 32bit mmio: [0xf0202100-0xf02021ff]
[00:51:12 14.03.2012] pci 0000:00:12.0: supports D1 D2
[00:51:12 14.03.2012] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[00:51:12 14.03.2012] pci 0000:00:12.0: PME# disabled
[00:51:12 14.03.2012] vgaarb: device added: PCI:0000:00:09.0,decodes=io+mem,owns=io+mem,locks=none
[00:51:12 14.03.2012] PCI: Discovered primary peer bus 01 [IRQ]
[00:51:12 14.03.2012] pci 0000:00:11.0: VIA IRQ router [1106:3177]
[00:51:12 14.03.2012] Switching to clocksource tsc
[00:51:12 14.03.2012] pnp: PnP ACPI: disabled
[00:51:12 14.03.2012] PnPBIOS: Scanning system for PnP BIOS support...
[00:51:12 14.03.2012] PnPBIOS: Found PnP BIOS installation structure at 0xc00ff020
[00:51:12 14.03.2012] PnPBIOS: PnP BIOS version 1.0, entry 0xea000:0x4180, dseg 0xea000
[00:51:12 14.03.2012] PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
[00:51:12 14.03.2012] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[00:51:12 14.03.2012] system 00:00: iomem range 0x100000-0xeffffff could not be reserved
[00:51:12 14.03.2012] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[00:51:12 14.03.2012] system 00:00: iomem range 0xcfe00-0xcffff could not be reserved
[00:51:12 14.03.2012] system 00:00: iomem range 0xfffc0000-0xffffffff has been reserved
[00:51:12 14.03.2012] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[00:51:12 14.03.2012] system 00:01: ioport range 0x1000-0x107f has been reserved
[00:51:12 14.03.2012] system 00:01: ioport range 0x1400-0x140f has been reserved
[00:51:12 14.03.2012] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[00:51:12 14.03.2012] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[00:51:12 14.03.2012] pci_bus 0000:01: resource 0 io: [0x00-0xffff]
[00:51:12 14.03.2012] pci_bus 0000:01: resource 1 mem: [0x000000-0xffffffff]
[00:51:12 14.03.2012] NET: Registered protocol family 2
[00:51:12 14.03.2012] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[00:51:12 14.03.2012] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[00:51:12 14.03.2012] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[00:51:12 14.03.2012] TCP: Hash tables configured (established 8192 bind 8192)
[00:51:12 14.03.2012] TCP reno registered
[00:51:12 14.03.2012] NET: Registered protocol family 1
[00:51:12 14.03.2012] pci 0000:00:09.0: Boot video device
[00:51:12 14.03.2012] Unpacking initramfs...
[00:51:13 14.03.2012] Freeing initrd memory: 8525k freed
[00:51:13 14.03.2012] audit: initializing netlink socket (disabled)
[00:51:13 14.03.2012] type=2000 audit(1331578363.150:1): initialized
[00:51:13 14.03.2012] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[00:51:13 14.03.2012] VFS: Disk quotas dquot_6.5.2
[00:51:13 14.03.2012] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[00:51:13 14.03.2012] msgmni has been set to 466
[00:51:13 14.03.2012] alg: No test for stdrng (krng)
[00:51:13 14.03.2012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[00:51:13 14.03.2012] io scheduler noop registered
[00:51:13 14.03.2012] io scheduler anticipatory registered
[00:51:13 14.03.2012] io scheduler deadline registered
[00:51:13 14.03.2012] io scheduler cfq registered (default)
[00:51:13 14.03.2012] isapnp: Scanning for PnP cards...
[00:51:13 14.03.2012] isapnp: No Plug & Play device found
[00:51:13 14.03.2012] Linux agpgart interface v0.103
[00:51:13 14.03.2012] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[00:51:13 14.03.2012] serial 00:0d: activated
[00:51:13 14.03.2012] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[00:51:13 14.03.2012] serial 00:0e: unable to assign resources
[00:51:13 14.03.2012] serial: probe of 00:0e failed with error -16
[00:51:13 14.03.2012] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[00:51:13 14.03.2012] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[00:51:13 14.03.2012] serio: i8042 KBD port at 0x60,0x64 irq 1
[00:51:13 14.03.2012] mice: PS/2 mouse device common for all mice
[00:51:13 14.03.2012] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[00:51:13 14.03.2012] rtc0: alarms up to one day, 242 bytes nvram
[00:51:13 14.03.2012] EISA: Probing bus 0 at eisa.0
[00:51:13 14.03.2012] Cannot allocate resource for EISA slot 1
[00:51:13 14.03.2012] EISA: Detected 0 cards.
[00:51:13 14.03.2012] cpuidle: using governor ladder
[00:51:13 14.03.2012] cpuidle: using governor menu
[00:51:13 14.03.2012] No iBFT detected.
[00:51:13 14.03.2012] TCP cubic registered
[00:51:13 14.03.2012] NET: Registered protocol family 10
[00:51:13 14.03.2012] Mobile IPv6
[00:51:13 14.03.2012] NET: Registered protocol family 17
[00:51:13 14.03.2012] Using IPI Shortcut mode
[00:51:13 14.03.2012] PM: Resume from disk failed.
[00:51:13 14.03.2012] registered taskstats version 1
[00:51:13 14.03.2012] rtc_cmos 00:06: setting system clock to 2012-03-12 18:52:44 UTC (1331578364)
[00:51:13 14.03.2012] Initalizing network drop monitor service
[00:51:13 14.03.2012] Freeing unused kernel memory: 444k freed
[00:51:13 14.03.2012] Write protecting the kernel text: 2344k
[00:51:13 14.03.2012] Write protecting the kernel read-only data: 896k
[00:51:14 14.03.2012] udev[42]: starting version 164
[00:51:15 14.03.2012] usbcore: registered new interface driver usbfs
[00:51:15 14.03.2012] usbcore: registered new interface driver hub
[00:51:15 14.03.2012] usbcore: registered new device driver usb
[00:51:15 14.03.2012] SCSI subsystem initialized
[00:51:15 14.03.2012] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[00:51:15 14.03.2012] PCI: setting IRQ 10 as level-triggered
[00:51:15 14.03.2012] ehci_hcd 0000:00:0b.2: found PCI INT C -> IRQ 10
[00:51:15 14.03.2012] ehci_hcd 0000:00:0b.2: sharing IRQ 10 with 0000:00:10.2
[00:51:15 14.03.2012] ehci_hcd 0000:00:0b.2: sharing IRQ 10 with 0000:00:11.5
[00:51:15 14.03.2012] ehci_hcd 0000:00:0b.2: EHCI Host Controller
[00:51:15 14.03.2012] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1
[00:51:15 14.03.2012] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[00:51:15 14.03.2012] ehci_hcd 0000:00:0b.2: irq 10, io mem 0xf0202000
[00:51:15 14.03.2012] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00
[00:51:15 14.03.2012] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[00:51:15 14.03.2012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[00:51:15 14.03.2012] usb usb1: Product: EHCI Host Controller
[00:51:15 14.03.2012] usb usb1: Manufacturer: Linux 2.6.32-5-486 ehci_hcd
[00:51:15 14.03.2012] usb usb1: SerialNumber: 0000:00:0b.2
[00:51:15 14.03.2012] usb usb1: configuration #1 chosen from 1 choice
[00:51:15 14.03.2012] hub 1-0:1.0: USB hub found
[00:51:15 14.03.2012] hub 1-0:1.0: 5 ports detected
[00:51:15 14.03.2012] libata version 3.00 loaded.
[00:51:15 14.03.2012] PCI: setting IRQ 7 as level-triggered
[00:51:15 14.03.2012] via-rhine 0000:00:12.0: found PCI INT A -> IRQ 7
[00:51:15 14.03.2012] via-rhine 0000:00:12.0: sharing IRQ 7 with 0000:00:0b.0
[00:51:15 14.03.2012] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[00:51:15 14.03.2012] eth0: VIA Rhine II at 0x1e200, 00:90:dc:05:f2:26, IRQ 7.
[00:51:15 14.03.2012] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1.
[00:51:15 14.03.2012] ohci_hcd 0000:00:0b.0: found PCI INT A -> IRQ 7
[00:51:15 14.03.2012] ohci_hcd 0000:00:0b.0: sharing IRQ 7 with 0000:00:12.0
[00:51:15 14.03.2012] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[00:51:15 14.03.2012] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[00:51:15 14.03.2012] ohci_hcd 0000:00:0b.0: irq 7, io mem 0xf0200000
[00:51:15 14.03.2012] uhci_hcd: USB Universal Host Controller Interface driver
[00:51:16 14.03.2012] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[00:51:16 14.03.2012] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[00:51:16 14.03.2012] usb usb2: Product: OHCI Host Controller
[00:51:16 14.03.2012] usb usb2: Manufacturer: Linux 2.6.32-5-486 ohci_hcd
[00:51:16 14.03.2012] usb usb2: SerialNumber: 0000:00:0b.0
[00:51:16 14.03.2012] usb usb2: configuration #1 chosen from 1 choice
[00:51:16 14.03.2012] hub 2-0:1.0: USB hub found
[00:51:16 14.03.2012] hub 2-0:1.0: 3 ports detected
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.0: found PCI INT A -> IRQ 7
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.0: sharing IRQ 7 with 0000:00:0b.0
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.0: sharing IRQ 7 with 0000:00:12.0
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.0: UHCI Host Controller
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.0: irq 10, io base 0x00001200
[00:51:16 14.03.2012] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[00:51:16 14.03.2012] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[00:51:16 14.03.2012] usb usb3: Product: UHCI Host Controller
[00:51:16 14.03.2012] usb usb3: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
[00:51:16 14.03.2012] usb usb3: SerialNumber: 0000:00:10.0
[00:51:16 14.03.2012] usb usb3: configuration #1 chosen from 1 choice
[00:51:16 14.03.2012] hub 3-0:1.0: USB hub found
[00:51:16 14.03.2012] hub 3-0:1.0: 2 ports detected
[00:51:16 14.03.2012] pata_via 0000:00:11.1: version 0.3.4
[00:51:16 14.03.2012] scsi0 : pata_via
[00:51:16 14.03.2012] scsi1 : pata_via
[00:51:16 14.03.2012] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
[00:51:16 14.03.2012] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[00:51:16 14.03.2012] PCI: setting IRQ 3 as level-triggered
[00:51:16 14.03.2012] ohci_hcd 0000:00:0b.1: found PCI INT B -> IRQ 3
[00:51:16 14.03.2012] ohci_hcd 0000:00:0b.1: OHCI Host Controller
[00:51:16 14.03.2012] ohci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 4
[00:51:16 14.03.2012] ohci_hcd 0000:00:0b.1: irq 3, io mem 0xf0201000
[00:51:16 14.03.2012] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[00:51:16 14.03.2012] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[00:51:16 14.03.2012] usb usb4: Product: OHCI Host Controller
[00:51:16 14.03.2012] usb usb4: Manufacturer: Linux 2.6.32-5-486 ohci_hcd
[00:51:16 14.03.2012] usb usb4: SerialNumber: 0000:00:0b.1
[00:51:16 14.03.2012] usb usb4: configuration #1 chosen from 1 choice
[00:51:16 14.03.2012] hub 4-0:1.0: USB hub found
[00:51:16 14.03.2012] hub 4-0:1.0: 2 ports detected
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.1: found PCI INT B -> IRQ 3
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.1: sharing IRQ 3 with 0000:00:0b.1
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.1: UHCI Host Controller
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.1: irq 10, io base 0x00001220
[00:51:16 14.03.2012] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[00:51:16 14.03.2012] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[00:51:16 14.03.2012] usb usb5: Product: UHCI Host Controller
[00:51:16 14.03.2012] usb usb5: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
[00:51:16 14.03.2012] usb usb5: SerialNumber: 0000:00:10.1
[00:51:16 14.03.2012] usb usb5: configuration #1 chosen from 1 choice
[00:51:16 14.03.2012] hub 5-0:1.0: USB hub found
[00:51:16 14.03.2012] hub 5-0:1.0: 2 ports detected
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.2: found PCI INT C -> IRQ 10
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.2: sharing IRQ 10 with 0000:00:0b.2
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.2: sharing IRQ 10 with 0000:00:11.5
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.2: UHCI Host Controller
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 6
[00:51:16 14.03.2012] uhci_hcd 0000:00:10.2: irq 10, io base 0x00001240
[00:51:16 14.03.2012] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[00:51:16 14.03.2012] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[00:51:16 14.03.2012] usb usb6: Product: UHCI Host Controller
[00:51:16 14.03.2012] usb usb6: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
[00:51:16 14.03.2012] usb usb6: SerialNumber: 0000:00:10.2
[00:51:16 14.03.2012] usb usb6: configuration #1 chosen from 1 choice
[00:51:16 14.03.2012] hub 6-0:1.0: USB hub found
[00:51:16 14.03.2012] hub 6-0:1.0: 2 ports detected
[00:51:16 14.03.2012] ata2.00: CFA: TS8GCF133, 20101110, max UDMA/66
[00:51:16 14.03.2012] ata2.00: 15662304 sectors, multi 0: LBA
[00:51:16 14.03.2012] ata2.00: limited to UDMA/33 due to 40-wire cable
[00:51:16 14.03.2012] ata2.00: configured for UDMA/33
[00:51:16 14.03.2012] scsi 1:0:0:0: Direct-Access ATA TS8GCF133 2010 PQ: 0 ANSI: 5
[00:51:16 14.03.2012] sd 1:0:0:0: [sda] 15662304 512-byte logical blocks: (8.01 GB/7.46 GiB)
[00:51:16 14.03.2012] sd 1:0:0:0: [sda] Write Protect is off
[00:51:16 14.03.2012] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[00:51:16 14.03.2012] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[00:51:16 14.03.2012] sda: sda1 sda2 < sda5 >
[00:51:16 14.03.2012] sd 1:0:0:0: [sda] Attached SCSI removable disk
[00:51:16 14.03.2012] usb 2-3: new full speed USB device using ohci_hcd and address 2
[00:51:16 14.03.2012] usb 2-3: New USB device found, idVendor=0403, idProduct=6001
[00:51:16 14.03.2012] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[00:51:16 14.03.2012] usb 2-3: SerialNumber: Reader BCEDDCE
[00:51:16 14.03.2012] usb 2-3: configuration #1 chosen from 1 choice
[00:51:17 14.03.2012] usb 4-1: new full speed USB device using ohci_hcd and address 2
[00:51:17 14.03.2012] usb 4-1: New USB device found, idVendor=0403, idProduct=6001
[00:51:17 14.03.2012] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[00:51:17 14.03.2012] usb 4-1: Product: Smartreader plus
[00:51:17 14.03.2012] usb 4-1: Manufacturer: Argolis BV
[00:51:17 14.03.2012] usb 4-1: SerialNumber: Reader 0
[00:51:17 14.03.2012] usb 4-1: configuration #1 chosen from 1 choice
[00:51:17 14.03.2012] usb 6-2: new full speed USB device using uhci_hcd and address 2
[00:51:17 14.03.2012] PM: Starting manual resume from disk
[00:51:17 14.03.2012] PM: Resume from partition 8:5
[00:51:17 14.03.2012] PM: Checking hibernation image.
[00:51:17 14.03.2012] PM: Error -22 checking image file
[00:51:17 14.03.2012] PM: Resume from disk failed.
[00:51:17 14.03.2012] kjournald starting. Commit interval 5 seconds
[00:51:17 14.03.2012] EXT3-fs: mounted filesystem with ordered data mode.
[00:51:17 14.03.2012] usb 6-2: New USB device found, idVendor=0bf8, idProduct=1006
[00:51:17 14.03.2012] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[00:51:17 14.03.2012] usb 6-2: Product: SmartCard Reader USB 2A
[00:51:17 14.03.2012] usb 6-2: Manufacturer: Fujitsu Siemens Computers
[00:51:17 14.03.2012] usb 6-2: configuration #1 chosen from 1 choice
[00:51:19 14.03.2012] udev[217]: starting version 164
[00:51:21 14.03.2012] NET: Registered protocol family 23
[00:51:21 14.03.2012] input: PC Speaker as /devices/platform/pcspkr/input/input0
[00:51:21 14.03.2012] usbcore: registered new interface driver usbserial
[00:51:21 14.03.2012] USB Serial support registered for generic
[00:51:21 14.03.2012] usbcore: registered new interface driver usbserial_generic
[00:51:21 14.03.2012] usbserial: USB Serial Driver core
[00:51:21 14.03.2012] USB Serial support registered for FTDI USB Serial Device
[00:51:21 14.03.2012] ftdi_sio 2-3:1.0: FTDI USB Serial Device converter detected
[00:51:21 14.03.2012] usb 2-3: Detected FT232BM
[00:51:21 14.03.2012] usb 2-3: Number of endpoints 2
[00:51:21 14.03.2012] usb 2-3: Endpoint 1 MaxPacketSize 64
[00:51:21 14.03.2012] usb 2-3: Endpoint 2 MaxPacketSize 64
[00:51:21 14.03.2012] usb 2-3: Setting MaxPacketSize 64
[00:51:21 14.03.2012] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[00:51:21 14.03.2012] usb 2-3: FTDI USB Serial Device converter now attached to ttyUSB0
[00:51:21 14.03.2012] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
[00:51:21 14.03.2012] usb 4-1: Detected FT232BM
[00:51:21 14.03.2012] usb 4-1: Number of endpoints 2
[00:51:21 14.03.2012] usb 4-1: Endpoint 1 MaxPacketSize 64
[00:51:21 14.03.2012] usb 4-1: Endpoint 2 MaxPacketSize 64
[00:51:21 14.03.2012] usb 4-1: Setting MaxPacketSize 64
[00:51:21 14.03.2012] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB1
[00:51:21 14.03.2012] usbcore: registered new interface driver ftdi_sio
[00:51:21 14.03.2012] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[00:51:21 14.03.2012] parport_pc 00:0f: activated
[00:51:21 14.03.2012] parport_pc 00:0f: reported by Plug and Play BIOS
[00:51:21 14.03.2012] parport0: PC-style at 0x278 (0x678), irq 5 [PCSPP,TRISTATE]
[00:51:22 14.03.2012] Error: Driver 'pcspkr' is already registered, aborting...
[00:51:22 14.03.2012] VIA 82xx Audio 0000:00:11.5: found PCI INT C -> IRQ 10
[00:51:22 14.03.2012] VIA 82xx Audio 0000:00:11.5: sharing IRQ 10 with 0000:00:0b.2
[00:51:22 14.03.2012] VIA 82xx Audio 0000:00:11.5: sharing IRQ 10 with 0000:00:10.2
[00:51:22 14.03.2012] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[00:51:24 14.03.2012] Adding 369656k swap on /dev/sda5. Priority:-1 extents:1 across:369656k
[00:51:24 14.03.2012] EXT3 FS on sda1, internal journal
[00:51:24 14.03.2012] loop: module loaded
[00:51:26 14.03.2012] eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1

also ttyUSB0 & ttyUSB1 werden anscheinend vergeben, sollte aber 3 Einträge geben bei 3 Readern oder?

/etc/udev/rules.d/10-usbadapter.rules

Code: Alles auswählen

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="Reader 9D70258", SYMLINK+="ORF"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="Reader 0", SYMLINK+="SKYDE"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="Reader BCEDDCE", SYMLINK+="HDPLUS"

dass ich die Reader in der oscam.server dann mit

Code: Alles auswählen

protocol                      = mouse
device                        = /dev/ORF (bzw.SKYDE/HDPLUS)

einbinden muss ist mir schon klar, aber wie gesagt, bei oscam restart waren die Reader dann nicht verfügbar

Was spricht gegen die Lösung mit protocol = smartreader, erfüllt doch auch den Zweck?

Beitrag von **feissmaik** » Mi 14. Mär 2012, 21:13

na, vorhin haste noch gemeint das garkein ttyUSB zugewiesen werden würde?

ich seh in deiner dmesg aber auch nur 2 smargos, der 3. ist kein smargo also "Reader 9D70258" taucht da nirgends auf - sicher das er richtig angeschlossen ist?

-> ls -la /dev/ttyUSB*
-> lsusb -v | grep iSerial

es spricht nichts dagegen, nur weisst du woran es liegt?

boesl · Beitrag von **boesl** » Mi 14. Mär 2012, 21:25

ok, dmesg in der console bringt eine andere ausgabe, habs einfach aus dem ipc-webif kopiert, da steht was anderes drinnen.
root@IPC ~ > dmesg

Code: Alles auswählen

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-486 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Mon Jan 16 15:32:33 UTC 2012
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
[    0.000000]  BIOS-e820: 000000000eff0000 - 000000000effffc0 (ACPI data)
[    0.000000]  BIOS-e820: 000000000effffc0 - 000000000f000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] last_pfn = 0xeff0 max_arch_pfn = 0x100000
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] init_memory_mapping: 0000000000000000-000000000eff0000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 000ec00000 page 2M
[    0.000000]  000ec00000 - 000eff0000 page 4k
[    0.000000] kernel direct mapping tables up to eff0000 @ 7000-c000
[    0.000000] RAMDISK: 0abe0000 - 0b4335f3
[    0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 239MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 0eff0000
[    0.000000]   low ram: 0 - 0eff0000
[    0.000000]   node 0 low ram: 00000000 - 0eff0000
[    0.000000]   node 0 bootmap 00001000 - 00002e00
[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 000eff0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0001000000 - 0001453a90]    TEXT DATA BSS ==> [0001000000 - 0001453a90]
[    0.000000]   #2 [000abe0000 - 000b4335f3]          RAMDISK ==> [000abe0000 - 000b4335f3]
[    0.000000]   #3 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
[    0.000000]   #4 [0001454000 - 000145a194]              BRK ==> [0001454000 - 000145a194]
[    0.000000]   #5 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #6 [0000001000 - 0000003000]          BOOTMAP ==> [0000001000 - 0000003000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0000eff0
[    0.000000]   HighMem  0x0000eff0 -> 0x0000eff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0000eff0
[    0.000000] On node 0 totalpages: 61325
[    0.000000] free_area_init_node: node 0, pgdat c1360c54, node_mem_map c145c000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3965 pages, LIFO batch:0
[    0.000000]   Normal zone: 448 pages used for memmap
[    0.000000]   Normal zone: 56880 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[    0.000000] No local APIC present or hardware disabled
[    0.000000] APIC: disable apic facility
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at f000000 (gap: f000000:f0f80000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60845
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-486 root=UUID=524133e8-6450-41e8-9801-61db331e24eb ro quiet
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 229980k/245696k available (2341k kernel code, 15132k reserved, 1145k data, 444k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa2000 - 0xfffff000   ( 372 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xcf7f0000 - 0xff7fe000   ( 768 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xceff0000   ( 239 MB)
[    0.000000]       .init : 0xc1368000 - 0xc13d7000   ( 444 kB)
[    0.000000]       .data : 0xc12497dd - 0xc1367c84   (1145 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12497dd   (2341 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:288
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: Using PIT calibration value
[    0.000000] Detected 799.853 MHz processor.
[    0.020055] Calibrating delay loop (skipped), value calculated using timer frequency.. 1599.70 BogoMIPS (lpj=3199412)
[    0.026984] Security Framework initialized
[    0.027065] SELinux:  Disabled at boot.
[    0.028521] Mount-cache hash table entries: 512
[    0.048205] Initializing cgroup subsys ns
[    0.048252] Initializing cgroup subsys cpuacct
[    0.048281] Initializing cgroup subsys devices
[    0.048412] Initializing cgroup subsys freezer
[    0.048438] Initializing cgroup subsys net_cls
[    0.050014] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (32 bytes/line)
[    0.050122] CPU: L2 Cache: 512K (128 bytes/line)
[    0.050148] CPU: Processor revision 1.5.0.2, 800 MHz
[    0.050168] CPU: Code Morphing Software revision 4.4.3-10-184
[    0.050488] CPU: 20030618 15:27 official release 4.4.3#1
[    0.050519] CPU serial number disabled.
[    0.050818] CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 stepping 03
[    0.050918] Checking 'hlt' instruction... OK.
[    0.114079] devtmpfs: initialized
[    0.150659] regulator: core version 0.5
[    0.154055] NET: Registered protocol family 16
[    0.163398] EISA bus registered
[    0.166925] PCI: PCI BIOS revision 2.10 entry at 0xe8684, last bus=0
[    0.167534] PCI: Using configuration type 1 for base access
[    0.192457] bio: create slab <bio-0> at 0
[    0.196383] ACPI: Interpreter disabled.
[    0.198484] vgaarb: loaded
[    0.214850] PCI: Probing PCI hardware
[    0.214913] PCI: Probing PCI hardware (bus 00)
[    0.215714] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0100000-0xf01fffff]
[    0.224317] pci 0000:00:09.0: reg 10 32bit mmio pref: [0xb0000000-0xbfffffff]
[    0.224407] pci 0000:00:09.0: reg 14 32bit mmio: [0xf0000000-0xf003ffff]
[    0.225300] pci 0000:00:09.0: reg 18 io port: [0xe000-0xe07f]
[    0.225386] pci 0000:00:09.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[    0.225533] pci 0000:00:09.0: supports D1 D2
[    0.226092] pci 0000:00:0b.0: reg 10 32bit mmio: [0xf0200000-0xf0200fff]
[    0.226199] pci 0000:00:0b.0: supports D1 D2
[    0.226308] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
[    0.226680] pci 0000:00:0b.0: PME# disabled
[    0.227459] pci 0000:00:0b.1: reg 10 32bit mmio: [0xf0201000-0xf0201fff]
[    0.227848] pci 0000:00:0b.1: supports D1 D2
[    0.228226] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot
[    0.228422] pci 0000:00:0b.1: PME# disabled
[    0.229653] pci 0000:00:0b.2: reg 10 32bit mmio: [0xf0202000-0xf02020ff]
[    0.229755] pci 0000:00:0b.2: supports D1 D2
[    0.229961] pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot
[    0.230250] pci 0000:00:0b.2: PME# disabled
[    0.231467] pci 0000:00:10.0: reg 20 io port: [0x1200-0x121f]
[    0.232234] pci 0000:00:10.0: supports D1 D2
[    0.232260] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.232290] pci 0000:00:10.0: PME# disabled
[    0.232499] pci 0000:00:10.1: reg 20 io port: [0x1220-0x123f]
[    0.232567] pci 0000:00:10.1: supports D1 D2
[    0.232585] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.232701] pci 0000:00:10.1: PME# disabled
[    0.233492] pci 0000:00:10.2: reg 20 io port: [0x1240-0x125f]
[    0.233789] pci 0000:00:10.2: supports D1 D2
[    0.233972] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.234001] pci 0000:00:10.2: PME# disabled
[    0.234310] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.234353] pci 0000:00:11.0: quirk: region 1000-107f claimed by vt8235 PM
[    0.234499] pci 0000:00:11.0: quirk: region 1400-140f claimed by vt8235 SMB
[    0.234727] pci 0000:00:11.1: reg 20 io port: [0x1100-0x110f]
[    0.234901] pci 0000:00:11.5: reg 10 io port: [0xe100-0xe1ff]
[    0.234970] pci 0000:00:11.5: supports D1 D2
[    0.235062] pci 0000:00:12.0: reg 10 io port: [0xe200-0xe2ff]
[    0.236001] pci 0000:00:12.0: reg 14 32bit mmio: [0xf0202100-0xf02021ff]
[    0.236297] pci 0000:00:12.0: supports D1 D2
[    0.236315] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.236341] pci 0000:00:12.0: PME# disabled
[    0.238195] vgaarb: device added: PCI:0000:00:09.0,decodes=io+mem,owns=io+mem,locks=none
[    0.247394] PCI: Discovered primary peer bus 01 [IRQ]
[    0.249548] pci 0000:00:11.0: VIA IRQ router [1106:3177]
[    0.257501] Switching to clocksource tsc
[    0.276891] pnp: PnP ACPI: disabled
[    0.276934] PnPBIOS: Scanning system for PnP BIOS support...
[    0.277523] PnPBIOS: Found PnP BIOS installation structure at 0xc00ff020
[    0.277621] PnPBIOS: PnP BIOS version 1.0, entry 0xea000:0x4180, dseg 0xea000
[    0.298062] PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
[    0.298376] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.298595] system 00:00: iomem range 0x100000-0xeffffff could not be reserved
[    0.298629] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[    0.298656] system 00:00: iomem range 0xcfe00-0xcffff could not be reserved
[    0.298686] system 00:00: iomem range 0xfffc0000-0xffffffff has been reserved
[    0.298768] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.298801] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.298829] system 00:01: ioport range 0x1400-0x140f has been reserved
[    0.306912] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.306943] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.307073] pci_bus 0000:01: resource 0 io:  [0x00-0xffff]
[    0.307097] pci_bus 0000:01: resource 1 mem: [0x000000-0xffffffff]
[    0.308145] NET: Registered protocol family 2
[    0.312263] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.316995] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.317326] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    0.317571] TCP: Hash tables configured (established 8192 bind 8192)
[    0.317592] TCP reno registered
[    0.319348] NET: Registered protocol family 1
[    0.319498] pci 0000:00:09.0: Boot video device
[    0.329041] Unpacking initramfs...
[    1.133142] Freeing initrd memory: 8525k freed
[    1.161239] audit: initializing netlink socket (disabled)
[    1.161399] type=2000 audit(1331682673.158:1): initialized
[    1.173929] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.184936] VFS: Disk quotas dquot_6.5.2
[    1.185383] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.186665] msgmni has been set to 466
[    1.192477] alg: No test for stdrng (krng)
[    1.193399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.193422] io scheduler noop registered
[    1.193435] io scheduler anticipatory registered
[    1.193448] io scheduler deadline registered
[    1.193520] io scheduler cfq registered (default)
[    1.197752] isapnp: Scanning for PnP cards...
[    1.553861] isapnp: No Plug & Play device found
[    1.578263] Linux agpgart interface v0.103
[    1.580138] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.585119] serial 00:0d: activated
[    1.586731] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.588461] serial 00:0e: unable to assign resources
[    1.589386] serial: probe of 00:0e failed with error -16
[    1.592785] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[    1.592803] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.593634] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.594339] mice: PS/2 mouse device common for all mice
[    1.595097] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.595241] rtc0: alarms up to one day, 242 bytes nvram
[    1.596369] EISA: Probing bus 0 at eisa.0
[    1.596518] Cannot allocate resource for EISA slot 1
[    1.597362] EISA: Detected 0 cards.
[    1.597387] cpuidle: using governor ladder
[    1.597409] cpuidle: using governor menu
[    1.597458] No iBFT detected.
[    1.601063] TCP cubic registered
[    1.603255] NET: Registered protocol family 10
[    1.607983] Mobile IPv6
[    1.608021] NET: Registered protocol family 17
[    1.608083] Using IPI Shortcut mode
[    1.608731] PM: Resume from disk failed.
[    1.608875] registered taskstats version 1
[    1.612103] rtc_cmos 00:06: setting system clock to 2012-03-13 23:51:13 UTC (1331682673)
[    1.612674] Initalizing network drop monitor service
[    1.613909] Freeing unused kernel memory: 444k freed
[    1.618049] Write protecting the kernel text: 2344k
[    1.618311] Write protecting the kernel read-only data: 896k
[    2.263180] udev[42]: starting version 164
[    3.710237] SCSI subsystem initialized
[    3.769807] usbcore: registered new interface driver usbfs
[    3.771156] usbcore: registered new interface driver hub
[    3.772690] usbcore: registered new device driver usb
[    3.805734] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.806247] PCI: setting IRQ 10 as level-triggered
[    3.806277] ehci_hcd 0000:00:0b.2: found PCI INT C -> IRQ 10
[    3.806711] ehci_hcd 0000:00:0b.2: sharing IRQ 10 with 0000:00:10.2
[    3.806759] ehci_hcd 0000:00:0b.2: sharing IRQ 10 with 0000:00:11.5
[    3.807306] ehci_hcd 0000:00:0b.2: EHCI Host Controller
[    3.809262] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1
[    3.900043] ehci_hcd 0000:00:0b.2: irq 10, io mem 0xf0202000
[    3.914845] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00
[    3.915933] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.915953] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.915966] usb usb1: Product: EHCI Host Controller
[    3.915978] usb usb1: Manufacturer: Linux 2.6.32-5-486 ehci_hcd
[    3.915989] usb usb1: SerialNumber: 0000:00:0b.2
[    3.920347] usb usb1: configuration #1 chosen from 1 choice
[    3.921008] hub 1-0:1.0: USB hub found
[    3.921176] hub 1-0:1.0: 5 ports detected
[    3.939947] libata version 3.00 loaded.
[    3.957810] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    3.958036] PCI: setting IRQ 7 as level-triggered
[    3.958063] via-rhine 0000:00:12.0: found PCI INT A -> IRQ 7
[    3.958374] via-rhine 0000:00:12.0: sharing IRQ 7 with 0000:00:0b.0
[    3.968596] eth0: VIA Rhine II at 0x1e200, 00:90:dc:05:f2:26, IRQ 7.
[    3.969759] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1.
[    3.976200] pata_via 0000:00:11.1: version 0.3.4
[    3.988801] scsi0 : pata_via
[    3.995860] scsi1 : pata_via
[    3.996687] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
[    3.996714] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[    4.054267] uhci_hcd: USB Universal Host Controller Interface driver
[    4.054594] uhci_hcd 0000:00:10.0: found PCI INT A -> IRQ 7
[    4.054639] uhci_hcd 0000:00:10.0: sharing IRQ 7 with 0000:00:0b.0
[    4.054682] uhci_hcd 0000:00:10.0: sharing IRQ 7 with 0000:00:12.0
[    4.054760] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    4.054921] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    4.055058] uhci_hcd 0000:00:10.0: irq 10, io base 0x00001200
[    4.060577] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    4.060603] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.060617] usb usb2: Product: UHCI Host Controller
[    4.060628] usb usb2: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
[    4.060640] usb usb2: SerialNumber: 0000:00:10.0
[    4.067689] usb usb2: configuration #1 chosen from 1 choice
[    4.068668] hub 2-0:1.0: USB hub found
[    4.068961] hub 2-0:1.0: 2 ports detected
[    4.069993] PCI: setting IRQ 3 as level-triggered
[    4.070024] uhci_hcd 0000:00:10.1: found PCI INT B -> IRQ 3
[    4.070069] uhci_hcd 0000:00:10.1: sharing IRQ 3 with 0000:00:0b.1
[    4.070288] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    4.070968] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    4.071114] uhci_hcd 0000:00:10.1: irq 10, io base 0x00001220
[    4.074968] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.080447] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.080474] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.080488] usb usb3: Product: UHCI Host Controller
[    4.080500] usb usb3: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
[    4.080511] usb usb3: SerialNumber: 0000:00:10.1
[    4.081461] usb usb3: configuration #1 chosen from 1 choice
[    4.082883] hub 3-0:1.0: USB hub found
[    4.083004] hub 3-0:1.0: 2 ports detected
[    4.084360] ohci_hcd 0000:00:0b.0: found PCI INT A -> IRQ 7
[    4.084440] ohci_hcd 0000:00:0b.0: sharing IRQ 7 with 0000:00:12.0
[    4.084604] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[    4.085468] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 4
[    4.085932] ohci_hcd 0000:00:0b.0: irq 7, io mem 0xf0200000
[    4.189305] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    4.189333] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.189347] usb usb4: Product: OHCI Host Controller
[    4.189435] usb usb4: Manufacturer: Linux 2.6.32-5-486 ohci_hcd
[    4.189449] usb usb4: SerialNumber: 0000:00:0b.0
[    4.191426] usb usb4: configuration #1 chosen from 1 choice
[    4.192309] hub 4-0:1.0: USB hub found
[    4.192432] hub 4-0:1.0: 3 ports detected
[    4.194242] uhci_hcd 0000:00:10.2: found PCI INT C -> IRQ 10
[    4.194301] uhci_hcd 0000:00:10.2: sharing IRQ 10 with 0000:00:0b.2
[    4.194587] uhci_hcd 0000:00:10.2: sharing IRQ 10 with 0000:00:11.5
[    4.194678] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    4.194805] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 5
[    4.194952] uhci_hcd 0000:00:10.2: irq 10, io base 0x00001240
[    4.197858] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    4.197883] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.197897] usb usb5: Product: UHCI Host Controller
[    4.197908] usb usb5: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
[    4.198150] usb usb5: SerialNumber: 0000:00:10.2
[    4.199665] usb usb5: configuration #1 chosen from 1 choice
[    4.201056] hub 5-0:1.0: USB hub found
[    4.201467] hub 5-0:1.0: 2 ports detected
[    4.203404] ohci_hcd 0000:00:0b.1: found PCI INT B -> IRQ 3
[    4.203895] ohci_hcd 0000:00:0b.1: OHCI Host Controller
[    4.204034] ohci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 6
[    4.204454] ohci_hcd 0000:00:0b.1: irq 3, io mem 0xf0201000
[    4.290799] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    4.350401] ata2.00: CFA: TS8GCF133, 20101110, max UDMA/66
[    4.350436] ata2.00: 15662304 sectors, multi 0: LBA 
[    4.350568] ata2.00: limited to UDMA/33 due to 40-wire cable
[    4.364850] ata2.00: configured for UDMA/33
[    4.373088] scsi 1:0:0:0: Direct-Access     ATA      TS8GCF133        2010 PQ: 0 ANSI: 5
[    4.389671] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    4.389699] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.389715] usb usb6: Product: OHCI Host Controller
[    4.389726] usb usb6: Manufacturer: Linux 2.6.32-5-486 ohci_hcd
[    4.389737] usb usb6: SerialNumber: 0000:00:0b.1
[    4.404312] usb usb6: configuration #1 chosen from 1 choice
[    4.405002] hub 6-0:1.0: USB hub found
[    4.405120] hub 6-0:1.0: 2 ports detected
[    4.437279] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101
[    4.437576] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.437593] usb 1-2: Product: USB 2.0 Hub [MTT]
[    4.440117] usb 1-2: configuration #1 chosen from 1 choice
[    4.442555] hub 1-2:1.0: USB hub found
[    4.479725] hub 1-2:1.0: 4 ports detected
[    4.633947] sd 1:0:0:0: [sda] 15662304 512-byte logical blocks: (8.01 GB/7.46 GiB)
[    4.642014] sd 1:0:0:0: [sda] Write Protect is off
[    4.642044] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.644300] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.697936]  sda: sda1 sda2 < sda5 >
[    4.715807] sd 1:0:0:0: [sda] Attached SCSI removable disk
[    4.960225] usb 4-3: new full speed USB device using ohci_hcd and address 2
[    5.183489] usb 4-3: New USB device found, idVendor=0403, idProduct=6001
[    5.183514] usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[    5.183529] usb 4-3: SerialNumber: Reader 9D70258
[    5.187403] usb 4-3: configuration #1 chosen from 1 choice
[    5.303985] usb 5-2: new full speed USB device using uhci_hcd and address 2
[    5.522828] usb 5-2: New USB device found, idVendor=0bf8, idProduct=1006
[    5.522854] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.522868] usb 5-2: Product: SmartCard Reader USB 2A
[    5.522878] usb 5-2: Manufacturer: Fujitsu Siemens Computers
[    5.525817] usb 5-2: configuration #1 chosen from 1 choice
[    5.582981] PM: Starting manual resume from disk
[    5.583013] PM: Resume from partition 8:5
[    5.583022] PM: Checking hibernation image.
[    5.585986] PM: Error -22 checking image file
[    5.586010] PM: Resume from disk failed.
[    5.625685] usb 1-2.1: new full speed USB device using ehci_hcd and address 4
[    5.698837] kjournald starting.  Commit interval 5 seconds
[    5.699202] EXT3-fs: mounted filesystem with ordered data mode.
[    5.757179] usb 1-2.1: New USB device found, idVendor=0403, idProduct=6001
[    5.757213] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.757230] usb 1-2.1: Product: Smartreader plus
[    5.757240] usb 1-2.1: Manufacturer: Argolis BV
[    5.757251] usb 1-2.1: SerialNumber: Reader 0
[    5.760609] usb 1-2.1: configuration #1 chosen from 1 choice
[    5.841033] usb 1-2.4: new full speed USB device using ehci_hcd and address 5
[    5.975050] usb 1-2.4: New USB device found, idVendor=0403, idProduct=6001
[    5.975079] usb 1-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[    5.975098] usb 1-2.4: SerialNumber: Reader BCEDDCE
[    5.975638] usb 1-2.4: configuration #1 chosen from 1 choice
[    7.610567] udev[240]: starting version 164
[    9.423617] NET: Registered protocol family 23
[    9.469295] input: PC Speaker as /devices/platform/pcspkr/input/input0
[    9.635622] usbcore: registered new interface driver usbserial
[    9.642057] USB Serial support registered for generic
[    9.645102] usbcore: registered new interface driver usbserial_generic
[    9.645128] usbserial: USB Serial Driver core
[    9.710358] parport_pc 00:0f: activated
[    9.710407] parport_pc 00:0f: reported by Plug and Play BIOS
[    9.710514] parport0: PC-style at 0x278 (0x678), irq 5 [PCSPP,TRISTATE]
[    9.768436] USB Serial support registered for FTDI USB Serial Device
[    9.794220] ftdi_sio 4-3:1.0: FTDI USB Serial Device converter detected
[    9.814608] usb 4-3: Detected FT232BM
[    9.814634] usb 4-3: Number of endpoints 2
[    9.814648] usb 4-3: Endpoint 1 MaxPacketSize 64
[    9.814661] usb 4-3: Endpoint 2 MaxPacketSize 64
[    9.814672] usb 4-3: Setting MaxPacketSize 64
[    9.825283] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[    9.826059] usb 4-3: FTDI USB Serial Device converter now attached to ttyUSB0
[    9.826314] ftdi_sio 1-2.1:1.0: FTDI USB Serial Device converter detected
[    9.827991] usb 1-2.1: Detected FT232BM
[    9.828014] usb 1-2.1: Number of endpoints 2
[    9.828029] usb 1-2.1: Endpoint 1 MaxPacketSize 64
[    9.828042] usb 1-2.1: Endpoint 2 MaxPacketSize 64
[    9.828054] usb 1-2.1: Setting MaxPacketSize 64
[    9.837978] usb 1-2.1: FTDI USB Serial Device converter now attached to ttyUSB1
[    9.840301] ftdi_sio 1-2.4:1.0: FTDI USB Serial Device converter detected
[    9.845261] usb 1-2.4: Detected FT232BM
[    9.845289] usb 1-2.4: Number of endpoints 2
[    9.845304] usb 1-2.4: Endpoint 1 MaxPacketSize 64
[    9.845317] usb 1-2.4: Endpoint 2 MaxPacketSize 64
[    9.845330] usb 1-2.4: Setting MaxPacketSize 64
[    9.860228] ftdi_sio ttyUSB2: Unable to read latency timer: -32
[    9.861393] usb 1-2.4: FTDI USB Serial Device converter now attached to ttyUSB2
[    9.861594] usbcore: registered new interface driver ftdi_sio
[    9.861616] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[   10.554762] Error: Driver 'pcspkr' is already registered, aborting...
[   10.704391] VIA 82xx Audio 0000:00:11.5: found PCI INT C -> IRQ 10
[   10.704449] VIA 82xx Audio 0000:00:11.5: sharing IRQ 10 with 0000:00:0b.2
[   10.704471] VIA 82xx Audio 0000:00:11.5: sharing IRQ 10 with 0000:00:10.2
[   10.704799] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   12.378874] Adding 369656k swap on /dev/sda5.  Priority:-1 extents:1 across:369656k 
[   12.669262] EXT3 FS on sda1, internal journal
[   12.958677] loop: module loaded
[   14.540720] eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[   25.313400] eth0: no IPv6 routers present
[   28.906388] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
[   28.937712] ftdi_sio 1-2.4:1.0: device disconnected
[   29.402840] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[   29.404349] ftdi_sio 1-2.1:1.0: device disconnected
[  111.079505] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[  111.082681] ftdi_sio 4-3:1.0: device disconnected
[  713.839490] ftdi_sio 4-3:1.0: FTDI USB Serial Device converter detected
[  713.851216] usb 4-3: Detected FT232BM
[  713.851291] usb 4-3: Number of endpoints 2
[  713.851316] usb 4-3: Endpoint 1 MaxPacketSize 64
[  713.851340] usb 4-3: Endpoint 2 MaxPacketSize 64
[  713.851360] usb 4-3: Setting MaxPacketSize 64
[  713.856438] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[  713.867384] usb 4-3: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1878.177061] usb 4-3: USB disconnect, address 2
[ 1878.195580] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 1878.202226] ftdi_sio 4-3:1.0: device disconnected
[ 2176.939937] usb 4-3: new full speed USB device using ohci_hcd and address 3
[ 2177.163116] usb 4-3: New USB device found, idVendor=0403, idProduct=6001
[ 2177.163153] usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 2177.163186] usb 4-3: SerialNumber: Reader 9D70258
[ 2177.173887] usb 4-3: configuration #1 chosen from 1 choice
[ 2177.181681] ftdi_sio 4-3:1.0: FTDI USB Serial Device converter detected
[ 2177.189573] usb 4-3: Detected FT232BM
[ 2177.189621] usb 4-3: Number of endpoints 2
[ 2177.189644] usb 4-3: Endpoint 1 MaxPacketSize 64
[ 2177.189669] usb 4-3: Endpoint 2 MaxPacketSize 64
[ 2177.189691] usb 4-3: Setting MaxPacketSize 64
[ 2177.193950] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[ 2177.200067] usb 4-3: FTDI USB Serial Device converter now attached to ttyUSB0
[ 2206.782729] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 2206.791141] ftdi_sio 4-3:1.0: device disconnected
[ 2249.403021] ftdi_sio 4-3:1.0: FTDI USB Serial Device converter detected
[ 2249.408373] usb 4-3: Detected FT232BM
[ 2249.408417] usb 4-3: Number of endpoints 2
[ 2249.408441] usb 4-3: Endpoint 1 MaxPacketSize 64
[ 2249.408464] usb 4-3: Endpoint 2 MaxPacketSize 64
[ 2249.408485] usb 4-3: Setting MaxPacketSize 64
[ 2249.410253] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[ 2249.415729] usb 4-3: FTDI USB Serial Device converter now attached to ttyUSB0
[34211.542492] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[34211.544959] ftdi_sio 4-3:1.0: device disconnected
[34935.845758] ftdi_sio 4-3:1.0: FTDI USB Serial Device converter detected
[34935.854480] usb 4-3: Detected FT232BM
[34935.854524] usb 4-3: Number of endpoints 2
[34935.854546] usb 4-3: Endpoint 1 MaxPacketSize 64
[34935.854569] usb 4-3: Endpoint 2 MaxPacketSize 64
[34935.854589] usb 4-3: Setting MaxPacketSize 64
[34935.856313] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[34935.868659] usb 4-3: FTDI USB Serial Device converter now attached to ttyUSB0
[34943.324428] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[34943.326477] ftdi_sio 4-3:1.0: device disconnected
[34986.700987] ftdi_sio 4-3:1.0: FTDI USB Serial Device converter detected
[34986.706540] usb 4-3: Detected FT232BM
[34986.706576] usb 4-3: Number of endpoints 2
[34986.706596] usb 4-3: Endpoint 1 MaxPacketSize 64
[34986.706615] usb 4-3: Endpoint 2 MaxPacketSize 64
[34986.706630] usb 4-3: Setting MaxPacketSize 64
[34986.709352] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[34986.713435] usb 4-3: FTDI USB Serial Device converter now attached to ttyUSB0
[35734.426986] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[35734.429112] ftdi_sio 4-3:1.0: device disconnected
[35780.119972] ftdi_sio 4-3:1.0: FTDI USB Serial Device converter detected
[35780.138199] usb 4-3: Detected FT232BM
[35780.138296] usb 4-3: Number of endpoints 2
[35780.138365] usb 4-3: Endpoint 1 MaxPacketSize 64
[35780.138430] usb 4-3: Endpoint 2 MaxPacketSize 64
[35780.138491] usb 4-3: Setting MaxPacketSize 64
[35780.149285] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[35780.178717] usb 4-3: FTDI USB Serial Device converter now attached to ttyUSB0
[36411.494949] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[36411.500879] ftdi_sio 4-3:1.0: device disconnected
[36441.106293] ftdi_sio 1-2.1:1.0: FTDI USB Serial Device converter detected
[36441.118589] usb 1-2.1: Detected FT232BM
[36441.118654] usb 1-2.1: Number of endpoints 2
[36441.118695] usb 1-2.1: Endpoint 1 MaxPacketSize 64
[36441.118735] usb 1-2.1: Endpoint 2 MaxPacketSize 64
[36441.118772] usb 1-2.1: Setting MaxPacketSize 64
[36441.130650] usb 1-2.1: FTDI USB Serial Device converter now attached to ttyUSB0
[36441.139625] ftdi_sio 4-3:1.0: FTDI USB Serial Device converter detected
[36441.157506] usb 4-3: Detected FT232BM
[36441.157574] usb 4-3: Number of endpoints 2
[36441.157615] usb 4-3: Endpoint 1 MaxPacketSize 64
[36441.157654] usb 4-3: Endpoint 2 MaxPacketSize 64
[36441.158062] usb 4-3: Setting MaxPacketSize 64
[36441.164800] ftdi_sio ttyUSB1: Unable to read latency timer: -32
[36441.186518] usb 4-3: FTDI USB Serial Device converter now attached to ttyUSB1
[36444.552671] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[36444.563308] ftdi_sio 4-3:1.0: device disconnected
[36444.669197] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[36444.676703] ftdi_sio 1-2.1:1.0: device disconnected

na, vorhin haste noch gemeint das garkein ttyUSB zugewiesen werden würde?

dachte ich deswegen, schaut auch nach wie vor so aus.
root@IPC ~ > ls -la /dev/ttyUSB*

Code: Alles auswählen

ls: Zugriff auf /dev/ttyUSB* nicht möglich: Datei oder Verzeichnis nicht gefunden

root@IPC ~ > lsusb -v | grep iSerial

Code: Alles auswählen

  iSerial                 1 0000:00:0b.1
  iSerial                 0 
  iSerial                 1 0000:00:10.2
  iSerial                 3 Reader 9D70258
  iSerial                 1 0000:00:0b.0
  iSerial                 1 0000:00:10.1
  iSerial                 1 0000:00:10.0
  iSerial                 3 Reader BCEDDCE
  iSerial                 3 Reader 0
  iSerial                 0 
  iSerial                 1 0000:00:0b.2

also im OSCam WEBIF hab ich alle 3 Reader verbunden, von dem her läuft es
wenn nichts dagegen spricht, verstehe ich nicht warum der aufwand mit udev. Die Serial der Reader ist schnell ausgelesen, also einfach in die oscam.server knallen und gut ist, ohne udev Konfiguration (ist zwar kein Aufwand, aber so geht's ja doch ne Spur komfortabler in meinen Augen)

Beitrag von **feissmaik** » Mi 14. Mär 2012, 21:59

mmh komsich - das dmesg über IPC Webif macht eigentlich nichts anderes als den Timestamp in menschlich-lesbar umzuwandeln aber an den Zeilen selber ändert es eigentlich nichts...

also laut dem dmesg Befehl wird auch ttyUSB2 zugewiesen also kA wieso du den nun nicht über oscam ansprechen kannst?

nunja, meine erfahrung ist das "smartreader" langsamer läuft als "mouse" aber wenn du keine Problem hast dann versteh ich auch nicht wieso du hier dann ein Problem beschreibst?
also sorry aber ist das Problem aus post#1 nicht mehr aktuell? steh jetzt nen bischen aufm schlauch....

boesl · Beitrag von **boesl** » Mi 14. Mär 2012, 22:02

nein, Problem wurde gelöst, steht in Post3 glaube ich - hab einfach den Smargo wo zuerst ORF drinnen war für HD+ verwendet und ORF im anderen, das hat das Problem gelöst - ist zwar seltsam, aber läuft ja nun

danke auf jeden Fall für deine inputs

Beitrag von **feissmaik** » Mi 14. Mär 2012, 22:07

aha oke sorry das hab ich jetzt irgendwie übersehen...

IPC

[GELÖST] - HD+ 1843 ERROR (no entitlements)

[GELÖST] - HD+ 1843 ERROR (no entitlements)

Re: HD+ 1843 ERROR (no entitlements)

Re: HD+ 1843 ERROR (no entitlements)

Re: HD+ 1843 ERROR (no entitlements)

Re: HD+ 1843 ERROR (no entitlements)

Re: HD+ 1843 ERROR (no entitlements)

Re: HD+ 1843 ERROR (no entitlements)

Re: HD+ 1843 ERROR (no entitlements)

Re: HD+ 1843 ERROR (no entitlements)

Re: HD+ 1843 ERROR (no entitlements)

Wer ist online?