Howto: Raspberry Pi - Problem mit Apache2 bei tmpfs

Fragen oder Probleme?
Antworten
dreamboxdoc
IPC Neuling
Beiträge: 11
Registriert: Mi 13. Jun 2012, 10:59
Kontaktdaten:
Kontaktdaten von dreamboxdoc

Howto: Raspberry Pi - Problem mit Apache2 bei tmpfs

Beitrag von dreamboxdoc »

Hi Leute,

wenn ihr das Skript tmp2ram.sh installiert habt und somit /var/log/* im RAM liegt,
dann müsst ihr die Startskript-Reihenfolge ändern...

Das Problem ist, dass Apache2 zu starten versucht und auf /var/log/ zugreift, das Verzeichnis jedoch noch nicht im RAM existiert bzw. tmpfs noch nicht angelegt wurde...

Die Fehlermeldung sieht dann so aus... [apache2: could not open error log file]

Lösung:
sudo mv /etc/rc2.d/S19apache2 /etc/rc2.d/S99apache2
sudo mv /etc/rc3.d/S19apache2 /etc/rc3.d/S99apache2

Rückgängig machen:
sudo update-rc.d apache2 defaults

Jetzt stimmt die Reihenfolge beim Booten...
...
Starting tmpfs file restore: varlog
Starting web server: apache2
...

Hoffe geholfen zu haben.
Mein Raspberry Pi rennt jetzt wie ne eins :)


Gruß
dreamboxdoc

Sent from my iPad using Tapatalk HD
Zuletzt geändert von dreamboxdoc am Mi 25. Jul 2012, 08:35, insgesamt 1-mal geändert.
Nach oben
Mayer
IPC Freak
Beiträge: 187
Registriert: Do 27. Okt 2011, 01:19
Kontaktdaten:
Kontaktdaten von Mayer

Re: Howto: Raspberry Pi - Problem mit Apache2 bei tmpfs

Beitrag von Mayer »

Bei mir schaut es zwar etwas anders aus, aber ich habe es trotzdem mal versucht umzusetzen. Leider ist es nach einen reboot alles wieder wie es vorher war
feissmaik hat geschrieben: ..Ein weiteres Update - jetzt auch mit Raspberry Support 8-)
Sind aber nur kleinere Anpassungen die eben das "i cams" Script betreffen, das hinzufügen einer oscam.armel Binary sowie der Anpassung von OSVERSION in der functions.sh..
Ausserdem gibt es mit der Himbeere wohl ein Problem mit dem apache2 in Kombination mit tmp2ram.sh was nun auch durch das ipcsetup.sh behoben wird...
Ich habe ja erst gestern installiert und dachte das in der aktuellen Version von dem Script nicht mehr nötig ist.

Vielleicht kann ja Feissmaik noch mal was dazu sagen.

FG
Nach oben
feissmaik
Entwickler Team
Beiträge: 2576
Registriert: So 17. Apr 2011, 11:39
Been thanked: 1 time
Kontaktdaten:
Kontaktdaten von feissmaik

Re: Howto: Raspberry Pi - Problem mit Apache2 bei tmpfs

Beitrag von feissmaik »

Was genau meinst du damit?

...ehrlich gesagt hab ich heute heimlich ein neues ipc-114.tgz hoch geladen, weil ich bemerkt hab das "i cams" von squeeze zu wheezy unterschiedlich is und ich langsam kein bock mehr hab für jede nur erdenkbare distro ne extra ipc-cams.sh bei zu legen... also scheiss ich jetzt wieder drauf, nur das webif bleibt weiter verschlüsselt
auch die oscam.armel binary von squeeze funktioniert unter wheezy nicht also hab ich nun heimlich auch eine für wheezy bei gefügt wodurch das paket jetzt halt leider auf 4mb angewachsen is :?

also ipc einfach nochmal drüber bügeln
Du musst nicht kämpfen um zu siegen
Nach oben
Mayer
IPC Freak
Beiträge: 187
Registriert: Do 27. Okt 2011, 01:19
Kontaktdaten:
Kontaktdaten von Mayer

Re: Howto: Raspberry Pi - Problem mit Apache2 bei tmpfs

Beitrag von Mayer »

Okay, dann teste ich das morgen mal und geb Rückmeldung.

FG
Nach oben
dreamboxdoc
IPC Neuling
Beiträge: 11
Registriert: Mi 13. Jun 2012, 10:59
Kontaktdaten:
Kontaktdaten von dreamboxdoc

Re: Howto: Raspberry Pi - Problem mit Apache2 bei tmpfs

Beitrag von dreamboxdoc »

Mayer hat geschrieben:Bei mir schaut es zwar etwas anders aus, aber ich habe es trotzdem mal versucht umzusetzen. Leider ist es nach einen reboot alles wieder wie es vorher war
Hi,

ja sorry, ist mir im Nachgang auch aufgefallen.
Einfach sudo update-rc.d apache2 defaults ignorieren.
Das setzt alles wieder auf default :P


Gruß
Nach oben
Mayer
IPC Freak
Beiträge: 187
Registriert: Do 27. Okt 2011, 01:19
Kontaktdaten:
Kontaktdaten von Mayer

Re: Howto: Raspberry Pi - Problem mit Apache2 bei tmpfs

Beitrag von Mayer »

ich habe heute IPC 11.4 noch mal frisch vom Server installiert, aber das Tmpfs Script verursacht immer noch die gleichen Probleme. Auch der Tipp von Dreamboxdoc bring keine Besserung.

FG
Nach oben
feissmaik
Entwickler Team
Beiträge: 2576
Registriert: So 17. Apr 2011, 11:39
Been thanked: 1 time
Kontaktdaten:
Kontaktdaten von feissmaik

Re: Howto: Raspberry Pi - Problem mit Apache2 bei tmpfs

Beitrag von feissmaik »

Poste bitte ein Log von dem Problem, weil bei mir funktioniert das sowohl mit Squeeze als auch Wheezy
Du musst nicht kämpfen um zu siegen
Nach oben
Mayer
IPC Freak
Beiträge: 187
Registriert: Do 27. Okt 2011, 01:19
Kontaktdaten:
Kontaktdaten von Mayer

Re: Howto: Raspberry Pi - Problem mit Apache2 bei tmpfs

Beitrag von Mayer »

Ich weiß nicht genau wie ich an den Log ran komme.

Das sehe ich auf dem Bildschirm bevor ich mich einlogge und unter /var/log/boot steht nur "(Nothing has been logged yet.)"

Wo genau soll ich da suchen?

FG
Nach oben
feissmaik
Entwickler Team
Beiträge: 2576
Registriert: So 17. Apr 2011, 11:39
Been thanked: 1 time
Kontaktdaten:
Kontaktdaten von feissmaik

Re: Howto: Raspberry Pi - Problem mit Apache2 bei tmpfs

Beitrag von feissmaik »

"was" steht denn da? das wär zumindest mal ein hinweis...

syslog,messages,debug,dmesg .. irgendwo da, eben irgendwo in /var/log/
Du musst nicht kämpfen um zu siegen
Nach oben
Mayer
IPC Freak
Beiträge: 187
Registriert: Do 27. Okt 2011, 01:19
Kontaktdaten:
Kontaktdaten von Mayer

Re: Howto: Raspberry Pi - Problem mit Apache2 bei tmpfs

Beitrag von Mayer »

also Syslog nach reboot:

Code: Alles auswählen

Jul 25 13:47:13 raspberrypi shutdown[1851]: shutting down for system reboot
Jul 25 13:47:13 raspberrypi init: Switching to runlevel: 6
Jul 25 13:47:17 raspberrypi ifplugd(eth0)[983]: Exiting.
Jul 25 13:47:17 raspberrypi ifplugd(lo)[968]: Exiting.
Jul 25 13:47:17 raspberrypi ntpd[1459]: ntpd exiting on signal 15
Jul 25 14:09:02 raspberrypi /USR/SBIN/CRON[1784]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -ignore_readdir_race -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete)
Jul 25 14:13:50 raspberrypi dbus[1394]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Jul 25 14:13:50 raspberrypi dbus[1394]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Jul 25 14:13:51 raspberrypi polkitd[1916]: started daemon version 0.105 using authority implementation `local' version `0.105'
Jul 25 14:13:51 raspberrypi dbus[1394]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jul 25 14:13:51 raspberrypi dbus[1394]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Jul 25 14:14:01 raspberrypi /USR/SBIN/CRON[1978]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Jul 25 14:15:01 raspberrypi /USR/SBIN/CRON[2007]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
messages:

Code: Alles auswählen

Jul 25 12:58:14 raspberrypi shutdown[1680]: shutting down for system reboot
Jul 25 13:06:26 raspberrypi kernel: imklog 5.8.11, log source = /proc/kmsg started.
Jul 25 13:06:26 raspberrypi rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="1298" x-info="http://www.rsyslog.com"] start
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] Initializing cgroup subsys cpu
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] Linux version 3.1.9+ (dc4@dc4-arm-01) (gcc version 4.5.1 (Broadcom-2708) ) #168 PREEMPT Sat Jul 14 18:56:31 BST 2012
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] Machine: BCM2708
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writeback
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48768
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] Kernel command line: dma.dmachans=0x3c bcm2708_fb.fbwidth=1184 bcm2708_fb.fbheight=928 bcm2708.boardrev=0x2 bcm2708.serial=0xb34beecf smsc95xx.macaddr=B8:27:EB:4B:EE:CF dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] Memory: 192MB = 192MB total
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] Memory: 187880k/187880k available, 8728k reserved, 0K highmem
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] Virtual kernel memory layout:
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] vmalloc : 0xcc800000 - 0xd8000000 ( 184 MB)
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] lowmem : 0xc0000000 - 0xcc000000 ( 192 MB)
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] .text : 0xc0008000 - 0xc05943d0 (5681 kB)
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] .init : 0xc0595000 - 0xc05c7000 ( 200 kB)
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] .data : 0xc05c8000 - 0xc05f93b8 ( 197 kB)
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] .bss : 0xc05f93dc - 0xc06c7504 ( 825 kB)
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] NR_IRQS:245
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] Console: colour dummy device 80x30
Jul 25 13:06:26 raspberrypi kernel: [ 0.000000] console [tty1] enabled
Jul 25 13:06:26 raspberrypi kernel: [ 2.734991] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
Jul 25 13:06:26 raspberrypi kernel: [ 2.793943] pid_max: default: 32768 minimum: 301
Jul 25 13:06:26 raspberrypi kernel: [ 2.794571] Mount-cache hash table entries: 512
Jul 25 13:06:26 raspberrypi kernel: [ 2.795230] Initializing cgroup subsys cpuacct
Jul 25 13:06:26 raspberrypi kernel: [ 2.795349] Initializing cgroup subsys devices
Jul 25 13:06:26 raspberrypi kernel: [ 2.795400] Initializing cgroup subsys freezer
Jul 25 13:06:26 raspberrypi kernel: [ 2.795443] Initializing cgroup subsys blkio
Jul 25 13:06:26 raspberrypi kernel: [ 2.795560] CPU: Testing write buffer coherency: ok
Jul 25 13:06:26 raspberrypi kernel: [ 2.795696] ftrace: allocating 14801 entries in 44 pages
Jul 25 13:06:26 raspberrypi kernel: [ 2.868772] hw perfevents: enabled with v6 PMU driver, 3 counters available
Jul 25 13:06:26 raspberrypi kernel: [ 2.870766] devtmpfs: initialized
Jul 25 13:06:26 raspberrypi kernel: [ 2.878542] NET: Registered protocol family 16
Jul 25 13:06:26 raspberrypi kernel: [ 2.880474] vc-mem: mm_vc_mem_phys_addr = 0x00000000
Jul 25 13:06:26 raspberrypi kernel: [ 2.880541] vc-mem: mm_vc_mem_size = 0x10000000 (256 MiB)
Jul 25 13:06:26 raspberrypi kernel: [ 2.881062] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
Jul 25 13:06:26 raspberrypi kernel: [ 2.881134] hw-breakpoint: maximum watchpoint size is 4 bytes.
Jul 25 13:06:26 raspberrypi kernel: [ 2.881183] mailbox: Broadcom VideoCore Mailbox driver
Jul 25 13:06:26 raspberrypi kernel: [ 2.881296] bcm2708_vcio: mailbox at f200b880
Jul 25 13:06:26 raspberrypi kernel: [ 2.881405] bcm_power: Broadcom power driver
Jul 25 13:06:26 raspberrypi kernel: [ 2.881452] bcm_power_open() -> 0
Jul 25 13:06:26 raspberrypi kernel: [ 2.881485] bcm_power_request(0, 8)
Jul 25 13:06:26 raspberrypi kernel: [ 3.382179] bcm_mailbox_read -> 00000080, 0
Jul 25 13:06:26 raspberrypi kernel: [ 3.382226] bcm_power_request -> 0
Jul 25 13:06:26 raspberrypi kernel: [ 3.382257] Serial: AMBA PL011 UART driver
Jul 25 13:06:26 raspberrypi kernel: [ 3.382451] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
Jul 25 13:06:26 raspberrypi kernel: [ 3.688248] console [ttyAMA0] enabled
Jul 25 13:06:26 raspberrypi kernel: [ 3.714071] bio: create slab at 0
Jul 25 13:06:26 raspberrypi kernel: [ 3.719642] SCSI subsystem initialized
Jul 25 13:06:26 raspberrypi kernel: [ 3.723691] usbcore: registered new interface driver usbfs
Jul 25 13:06:26 raspberrypi kernel: [ 3.729483] usbcore: registered new interface driver hub
Jul 25 13:06:26 raspberrypi kernel: [ 3.735119] usbcore: registered new device driver usb
Jul 25 13:06:26 raspberrypi kernel: [ 3.741278] Switching to clocksource stc
Jul 25 13:06:26 raspberrypi kernel: [ 3.750334] Switched to NOHz mode on CPU #0
Jul 25 13:06:26 raspberrypi kernel: [ 3.764035] FS-Cache: Loaded
Jul 25 13:06:26 raspberrypi kernel: [ 3.767429] CacheFiles: Loaded
Jul 25 13:06:26 raspberrypi kernel: [ 3.789041] NET: Registered protocol family 2
Jul 25 13:06:26 raspberrypi kernel: [ 3.793994] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Jul 25 13:06:26 raspberrypi kernel: [ 3.802574] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Jul 25 13:06:26 raspberrypi kernel: [ 3.810103] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Jul 25 13:06:26 raspberrypi kernel: [ 3.816808] TCP: Hash tables configured (established 8192 bind 8192)
Jul 25 13:06:26 raspberrypi kernel: [ 3.823194] TCP reno registered
Jul 25 13:06:26 raspberrypi kernel: [ 3.826405] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jul 25 13:06:26 raspberrypi kernel: [ 3.832297] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jul 25 13:06:26 raspberrypi kernel: [ 3.839166] NET: Registered protocol family 1
Jul 25 13:06:26 raspberrypi kernel: [ 3.844530] RPC: Registered named UNIX socket transport module.
Jul 25 13:06:26 raspberrypi kernel: [ 3.850736] RPC: Registered udp transport module.
Jul 25 13:06:26 raspberrypi kernel: [ 3.855514] RPC: Registered tcp transport module.
Jul 25 13:06:26 raspberrypi kernel: [ 3.860242] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jul 25 13:06:26 raspberrypi kernel: [ 3.867081] bcm2708_dma: DMA manager at cc808000
Jul 25 13:06:26 raspberrypi kernel: [ 3.877517] vc-mem: Videocore memory driver
Jul 25 13:06:26 raspberrypi kernel: [ 3.882619] audit: initializing netlink socket (disabled)
Jul 25 13:06:26 raspberrypi kernel: [ 3.888183] type=2000 audit(0.780:1): initialized
Jul 25 13:06:26 raspberrypi kernel: [ 4.000461] VFS: Disk quotas dquot_6.5.2
Jul 25 13:06:26 raspberrypi kernel: [ 4.004675] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jul 25 13:06:26 raspberrypi kernel: [ 4.012699] FS-Cache: Netfs 'nfs' registered for caching
Jul 25 13:06:26 raspberrypi kernel: [ 4.019415] msgmni has been set to 366
Jul 25 13:06:26 raspberrypi kernel: [ 4.025959] io scheduler noop registered
Jul 25 13:06:26 raspberrypi kernel: [ 4.029934] io scheduler deadline registered (default)
Jul 25 13:06:26 raspberrypi kernel: [ 4.035483] io scheduler cfq registered
Jul 25 13:06:26 raspberrypi kernel: [ 4.039632] BCM2708FB: registering framebuffer (1184x928@16)
Jul 25 13:06:26 raspberrypi kernel: [ 4.046164] bcm2708_fb_set_par info(cb8ec400) 1184x928 (1184x928), 0, 16
Jul 25 13:06:26 raspberrypi kernel: [ 4.051424] BCM2708FB: start = ccc00000,4d385000 width=1184, height=928, bpp=16, pitch=2368 size=2197504 success=0
Jul 25 13:06:26 raspberrypi kernel: [ 4.067547] Console: switching to colour frame buffer device 148x58
Jul 25 13:06:26 raspberrypi kernel: [ 4.106136] BCM2708FB: register framebuffer (0)
Jul 25 13:06:26 raspberrypi kernel: [ 4.111609] kgdb: Registered I/O driver kgdboc.
Jul 25 13:06:26 raspberrypi kernel: [ 4.128561] brd: module loaded
Jul 25 13:06:26 raspberrypi kernel: [ 4.138172] loop: module loaded
Jul 25 13:06:26 raspberrypi kernel: [ 4.142397] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
Jul 25 13:06:26 raspberrypi kernel: [ 4.150156] vcos: [1]: vchiq_init_state: called
Jul 25 13:06:26 raspberrypi kernel: [ 4.163762] usbcore: registered new interface driver smsc95xx
Jul 25 13:06:26 raspberrypi kernel: [ 4.169831] cdc_ncm: 04-Aug-2011
Jul 25 13:06:26 raspberrypi kernel: [ 4.173297] usbcore: registered new interface driver cdc_ncm
Jul 25 13:06:26 raspberrypi kernel: [ 4.179173] dwc_otg: version 2.90b 6-MAY-2010 (platform bus)
Jul 25 13:06:26 raspberrypi kernel: [ 4.185426] Core Release: 2.80a
Jul 25 13:06:26 raspberrypi kernel: [ 4.188696] Setting default values for core params
Jul 25 13:06:26 raspberrypi kernel: [ 4.193647] Finished setting default values for core params
Jul 25 13:06:26 raspberrypi kernel: [ 4.199780] cc840008 -> 1
Jul 25 13:06:26 raspberrypi kernel: [ 4.402525] Using Buffer DMA mode
Jul 25 13:06:26 raspberrypi kernel: [ 4.405995] Periodic Transfer Interrupt Enhancement - disabled
Jul 25 13:06:26 raspberrypi kernel: [ 4.411983] Multiprocessor Interrupt Enhancement - disabled
Jul 25 13:06:26 raspberrypi kernel: [ 4.417828] dwc_otg bcm2708_usb: DWC OTG Controller
Jul 25 13:06:26 raspberrypi kernel: [ 4.422921] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
Jul 25 13:06:26 raspberrypi kernel: [ 4.430497] dwc_otg bcm2708_usb: irq 75, io mem 0x00000000
Jul 25 13:06:26 raspberrypi kernel: [ 4.442062] Init: Port Power? op_state=1
Jul 25 13:06:26 raspberrypi kernel: [ 4.452173] Init: Power Port (0)
Jul 25 13:06:26 raspberrypi kernel: [ 4.461623] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jul 25 13:06:26 raspberrypi kernel: [ 4.474584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 25 13:06:26 raspberrypi kernel: [ 4.487973] usb usb1: Product: DWC OTG Controller
Jul 25 13:06:26 raspberrypi kernel: [ 4.498773] usb usb1: Manufacturer: Linux 3.1.9+ dwc_otg_hcd
Jul 25 13:06:26 raspberrypi kernel: [ 4.510421] usb usb1: SerialNumber: bcm2708_usb
Jul 25 13:06:26 raspberrypi kernel: [ 4.522121] hub 1-0:1.0: USB hub found
Jul 25 13:06:26 raspberrypi kernel: [ 4.531992] hub 1-0:1.0: 1 port detected
Jul 25 13:06:26 raspberrypi kernel: [ 4.543014] usbcore: registered new interface driver uas
Jul 25 13:06:26 raspberrypi kernel: [ 4.554311] Initializing USB Mass Storage driver...
Jul 25 13:06:26 raspberrypi kernel: [ 4.565472] usbcore: registered new interface driver usb-storage
Jul 25 13:06:26 raspberrypi kernel: [ 4.577359] USB Mass Storage support registered.
Jul 25 13:06:26 raspberrypi kernel: [ 4.588234] usbcore: registered new interface driver libusual
Jul 25 13:06:26 raspberrypi kernel: [ 4.600583] mousedev: PS/2 mouse device common for all mice
Jul 25 13:06:26 raspberrypi kernel: [ 4.612254] cpuidle: using governor ladder
Jul 25 13:06:26 raspberrypi kernel: [ 4.622331] cpuidle: using governor menu
Jul 25 13:06:26 raspberrypi kernel: [ 4.632409] sdhci: Secure Digital Host Controller Interface driver
Jul 25 13:06:26 raspberrypi kernel: [ 4.644729] sdhci: Copyright(c) Pierre Ossman
Jul 25 13:06:26 raspberrypi kernel: [ 4.655458] bcm_power_open() -> 1
Jul 25 13:06:26 raspberrypi kernel: [ 4.665634] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
Jul 25 13:06:26 raspberrypi kernel: [ 4.679687] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
Jul 25 13:06:26 raspberrypi kernel: [ 4.691694] sdhci-pltfm: SDHCI platform and OF driver helper
Jul 25 13:06:26 raspberrypi kernel: [ 4.705443] usbcore: registered new interface driver usbhid
Jul 25 13:06:26 raspberrypi kernel: [ 4.717206] usbhid: USB HID core driver
Jul 25 13:06:26 raspberrypi kernel: [ 4.750316] TCP cubic registered
Jul 25 13:06:26 raspberrypi kernel: [ 4.785326] Initializing XFRM netlink socket
Jul 25 13:06:26 raspberrypi kernel: [ 4.795874] NET: Registered protocol family 17
Jul 25 13:06:26 raspberrypi kernel: [ 4.825485] Registering the dns_resolver key type
Jul 25 13:06:26 raspberrypi kernel: [ 4.839011] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
Jul 25 13:06:26 raspberrypi kernel: [ 4.863268] mmc0: new high speed SDHC card at address 0002
Jul 25 13:06:26 raspberrypi kernel: [ 4.878567] Waiting for root device /dev/mmcblk0p2...
Jul 25 13:06:26 raspberrypi kernel: [ 4.890508] mmcblk0: mmc0:0002 00000 7.41 GiB
Jul 25 13:06:26 raspberrypi kernel: [ 4.903134] mmcblk0: p1 p2
Jul 25 13:06:26 raspberrypi kernel: [ 4.995346] usb 1-1: new high speed USB device number 2 using dwc_otg
Jul 25 13:06:26 raspberrypi kernel: [ 5.040704] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jul 25 13:06:26 raspberrypi kernel: [ 5.075391] VFS: Mounted root (ext4 filesystem) on device 179:2.
Jul 25 13:06:26 raspberrypi kernel: [ 5.096698] Freeing init memory: 200K
Jul 25 13:06:26 raspberrypi kernel: [ 5.256018] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
Jul 25 13:06:26 raspberrypi kernel: [ 5.269740] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul 25 13:06:26 raspberrypi kernel: [ 5.284313] hub 1-1:1.0: USB hub found
Jul 25 13:06:26 raspberrypi kernel: [ 5.295478] hub 1-1:1.0: 3 ports detected
Jul 25 13:06:26 raspberrypi kernel: [ 5.585630] usb 1-1.1: new high speed USB device number 3 using dwc_otg
Jul 25 13:06:26 raspberrypi kernel: [ 5.716125] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
Jul 25 13:06:26 raspberrypi kernel: [ 5.740116] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul 25 13:06:26 raspberrypi kernel: [ 5.763428] smsc95xx v1.0.4
Jul 25 13:06:26 raspberrypi kernel: [ 5.841179] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:4b:ee:cf
Jul 25 13:06:26 raspberrypi kernel: [ 13.625937] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jul 25 13:06:26 raspberrypi kernel: [ 14.005526] ### snd_bcm2835_alsa_probe c05d07a0 ############### PROBING FOR bcm2835 ALSA device (0):(1) ###############
Jul 25 13:06:26 raspberrypi kernel: [ 14.034304] Creating card...
Jul 25 13:06:26 raspberrypi kernel: [ 14.044091] Creating device/chip ..
Jul 25 13:06:26 raspberrypi kernel: [ 14.054911] Adding controls ..
Jul 25 13:06:26 raspberrypi kernel: [ 14.064783] Registering card ....
Jul 25 13:06:26 raspberrypi kernel: [ 14.084034] bcm2835 ALSA CARD CREATED!
Jul 25 13:06:26 raspberrypi kernel: [ 14.103379] ### BCM2835 ALSA driver init OK ###
Jul 25 13:06:26 raspberrypi kernel: [ 17.607582] mmc0: missed completion of cmd 17 DMA (512/512 [1]/[1]) - ignoring it
Jul 25 13:06:26 raspberrypi kernel: [ 17.621703] mmc0: DMA IRQ 6 ignored - results were reset
Jul 25 13:06:26 raspberrypi kernel: [ 21.134333] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
Jul 25 13:06:30 raspberrypi kernel: [ 29.193988] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SS
Jul 25 13:09:18 raspberrypi shutdown[1692]: shutting down for system halt
Jul 25 13:09:36 raspberrypi kernel: imklog 5.8.11, log source = /proc/kmsg started.
Jul 25 13:09:36 raspberrypi rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="1304" x-info="http://www.rsyslog.com"] start
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] Initializing cgroup subsys cpu
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] Linux version 3.1.9+ (dc4@dc4-arm-01) (gcc version 4.5.1 (Broadcom-2708) ) #168 PREEMPT Sat Jul 14 18:56:31 BST 2012
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] Machine: BCM2708
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writeback
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48768
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] Kernel command line: dma.dmachans=0x3c bcm2708_fb.fbwidth=1184 bcm2708_fb.fbheight=928 bcm2708.boardrev=0x2 bcm2708.serial=0xb34beecf smsc95xx.macaddr=B8:27:EB:4B:EE:CF dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] Memory: 192MB = 192MB total
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] Memory: 187880k/187880k available, 8728k reserved, 0K highmem
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] Virtual kernel memory layout:
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] vmalloc : 0xcc800000 - 0xd8000000 ( 184 MB)
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] lowmem : 0xc0000000 - 0xcc000000 ( 192 MB)
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] .text : 0xc0008000 - 0xc05943d0 (5681 kB)
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] .init : 0xc0595000 - 0xc05c7000 ( 200 kB)
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] .data : 0xc05c8000 - 0xc05f93b8 ( 197 kB)
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] .bss : 0xc05f93dc - 0xc06c7504 ( 825 kB)
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] NR_IRQS:245
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] Console: colour dummy device 80x30
Jul 25 13:09:36 raspberrypi kernel: [ 0.000000] console [tty1] enabled
Jul 25 13:09:36 raspberrypi kernel: [ 2.878392] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
Jul 25 13:09:36 raspberrypi kernel: [ 2.937346] pid_max: default: 32768 minimum: 301
Jul 25 13:09:36 raspberrypi kernel: [ 2.937976] Mount-cache hash table entries: 512
Jul 25 13:09:36 raspberrypi kernel: [ 2.938637] Initializing cgroup subsys cpuacct
Jul 25 13:09:36 raspberrypi kernel: [ 2.938752] Initializing cgroup subsys devices
Jul 25 13:09:36 raspberrypi kernel: [ 2.938805] Initializing cgroup subsys freezer
Jul 25 13:09:36 raspberrypi kernel: [ 2.938848] Initializing cgroup subsys blkio
Jul 25 13:09:36 raspberrypi kernel: [ 2.938966] CPU: Testing write buffer coherency: ok
Jul 25 13:09:36 raspberrypi kernel: [ 2.939101] ftrace: allocating 14801 entries in 44 pages
Jul 25 13:09:36 raspberrypi kernel: [ 3.012213] hw perfevents: enabled with v6 PMU driver, 3 counters available
Jul 25 13:09:36 raspberrypi kernel: [ 3.014196] devtmpfs: initialized
Jul 25 13:09:36 raspberrypi kernel: [ 3.021954] NET: Registered protocol family 16
Jul 25 13:09:36 raspberrypi kernel: [ 3.023894] vc-mem: mm_vc_mem_phys_addr = 0x00000000
Jul 25 13:09:36 raspberrypi kernel: [ 3.023960] vc-mem: mm_vc_mem_size = 0x10000000 (256 MiB)
Jul 25 13:09:36 raspberrypi kernel: [ 3.024485] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
Jul 25 13:09:36 raspberrypi kernel: [ 3.024558] hw-breakpoint: maximum watchpoint size is 4 bytes.
Jul 25 13:09:36 raspberrypi kernel: [ 3.024607] mailbox: Broadcom VideoCore Mailbox driver
Jul 25 13:09:36 raspberrypi kernel: [ 3.024722] bcm2708_vcio: mailbox at f200b880
Jul 25 13:09:36 raspberrypi kernel: [ 3.024829] bcm_power: Broadcom power driver
Jul 25 13:09:36 raspberrypi kernel: [ 3.024876] bcm_power_open() -> 0
Jul 25 13:09:36 raspberrypi kernel: [ 3.024909] bcm_power_request(0, 8)
Jul 25 13:09:36 raspberrypi kernel: [ 3.525604] bcm_mailbox_read -> 00000080, 0
Jul 25 13:09:36 raspberrypi kernel: [ 3.525652] bcm_power_request -> 0
Jul 25 13:09:36 raspberrypi kernel: [ 3.525684] Serial: AMBA PL011 UART driver
Jul 25 13:09:36 raspberrypi kernel: [ 3.525875] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
Jul 25 13:09:36 raspberrypi kernel: [ 3.831673] console [ttyAMA0] enabled
Jul 25 13:09:36 raspberrypi kernel: [ 3.857485] bio: create slab at 0
Jul 25 13:09:36 raspberrypi kernel: [ 3.863060] SCSI subsystem initialized
Jul 25 13:09:36 raspberrypi kernel: [ 3.867107] usbcore: registered new interface driver usbfs
Jul 25 13:09:36 raspberrypi kernel: [ 3.872899] usbcore: registered new interface driver hub
Jul 25 13:09:36 raspberrypi kernel: [ 3.878535] usbcore: registered new device driver usb
Jul 25 13:09:36 raspberrypi kernel: [ 3.884694] Switching to clocksource stc
Jul 25 13:09:36 raspberrypi kernel: [ 3.893751] Switched to NOHz mode on CPU #0
Jul 25 13:09:36 raspberrypi kernel: [ 3.907456] FS-Cache: Loaded
Jul 25 13:09:36 raspberrypi kernel: [ 3.910852] CacheFiles: Loaded
Jul 25 13:09:36 raspberrypi kernel: [ 3.932402] NET: Registered protocol family 2
Jul 25 13:09:36 raspberrypi kernel: [ 3.937360] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Jul 25 13:09:36 raspberrypi kernel: [ 3.945933] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Jul 25 13:09:36 raspberrypi kernel: [ 3.953459] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Jul 25 13:09:36 raspberrypi kernel: [ 3.960166] TCP: Hash tables configured (established 8192 bind 8192)
Jul 25 13:09:36 raspberrypi kernel: [ 3.966551] TCP reno registered
Jul 25 13:09:36 raspberrypi kernel: [ 3.969759] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jul 25 13:09:36 raspberrypi kernel: [ 3.975651] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jul 25 13:09:36 raspberrypi kernel: [ 3.982514] NET: Registered protocol family 1
Jul 25 13:09:36 raspberrypi kernel: [ 3.987876] RPC: Registered named UNIX socket transport module.
Jul 25 13:09:36 raspberrypi kernel: [ 3.994059] RPC: Registered udp transport module.
Jul 25 13:09:36 raspberrypi kernel: [ 3.998833] RPC: Registered tcp transport module.
Jul 25 13:09:36 raspberrypi kernel: [ 4.003562] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jul 25 13:09:36 raspberrypi kernel: [ 4.010408] bcm2708_dma: DMA manager at cc808000
Jul 25 13:09:36 raspberrypi kernel: [ 4.020840] vc-mem: Videocore memory driver
Jul 25 13:09:36 raspberrypi kernel: [ 4.025945] audit: initializing netlink socket (disabled)
Jul 25 13:09:36 raspberrypi kernel: [ 4.031509] type=2000 audit(0.780:1): initialized
Jul 25 13:09:36 raspberrypi kernel: [ 4.143568] VFS: Disk quotas dquot_6.5.2
Jul 25 13:09:36 raspberrypi kernel: [ 4.147780] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jul 25 13:09:36 raspberrypi kernel: [ 4.155808] FS-Cache: Netfs 'nfs' registered for caching
Jul 25 13:09:36 raspberrypi kernel: [ 4.162530] msgmni has been set to 366
Jul 25 13:09:36 raspberrypi kernel: [ 4.169101] io scheduler noop registered
Jul 25 13:09:36 raspberrypi kernel: [ 4.173077] io scheduler deadline registered (default)
Jul 25 13:09:36 raspberrypi kernel: [ 4.178437] io scheduler cfq registered
Jul 25 13:09:36 raspberrypi kernel: [ 4.182755] BCM2708FB: registering framebuffer (1184x928@16)
Jul 25 13:09:36 raspberrypi kernel: [ 4.189295] bcm2708_fb_set_par info(cb8ec400) 1184x928 (1184x928), 0, 16
Jul 25 13:09:36 raspberrypi kernel: [ 4.207723] BCM2708FB: start = ccc00000,4d385000 width=1184, height=928, bpp=16, pitch=2368 size=2197504 success=0
Jul 25 13:09:36 raspberrypi kernel: [ 4.223778] Console: switching to colour frame buffer device 148x58
Jul 25 13:09:36 raspberrypi kernel: [ 4.262274] BCM2708FB: register framebuffer (0)
Jul 25 13:09:36 raspberrypi kernel: [ 4.267741] kgdb: Registered I/O driver kgdboc.
Jul 25 13:09:36 raspberrypi kernel: [ 4.284688] brd: module loaded
Jul 25 13:09:36 raspberrypi kernel: [ 4.294305] loop: module loaded
Jul 25 13:09:36 raspberrypi kernel: [ 4.298537] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
Jul 25 13:09:36 raspberrypi kernel: [ 4.306280] vcos: [1]: vchiq_init_state: called
Jul 25 13:09:36 raspberrypi kernel: [ 4.319981] usbcore: registered new interface driver smsc95xx
Jul 25 13:09:36 raspberrypi kernel: [ 4.325962] cdc_ncm: 04-Aug-2011
Jul 25 13:09:36 raspberrypi kernel: [ 4.329498] usbcore: registered new interface driver cdc_ncm
Jul 25 13:09:36 raspberrypi kernel: [ 4.335323] dwc_otg: version 2.90b 6-MAY-2010 (platform bus)
Jul 25 13:09:36 raspberrypi kernel: [ 4.341551] Core Release: 2.80a
Jul 25 13:09:36 raspberrypi kernel: [ 4.344821] Setting default values for core params
Jul 25 13:09:36 raspberrypi kernel: [ 4.349888] Finished setting default values for core params
Jul 25 13:09:36 raspberrypi kernel: [ 4.355921] cc840008 -> 1
Jul 25 13:09:36 raspberrypi kernel: [ 4.558684] Using Buffer DMA mode
Jul 25 13:09:36 raspberrypi kernel: [ 4.562115] Periodic Transfer Interrupt Enhancement - disabled
Jul 25 13:09:36 raspberrypi kernel: [ 4.568096] Multiprocessor Interrupt Enhancement - disabled
Jul 25 13:09:36 raspberrypi kernel: [ 4.573949] dwc_otg bcm2708_usb: DWC OTG Controller
Jul 25 13:09:36 raspberrypi kernel: [ 4.579105] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
Jul 25 13:09:36 raspberrypi kernel: [ 4.586612] dwc_otg bcm2708_usb: irq 75, io mem 0x00000000
Jul 25 13:09:36 raspberrypi kernel: [ 4.598261] Init: Port Power? op_state=1
Jul 25 13:09:36 raspberrypi kernel: [ 4.608244] Init: Power Port (0)
Jul 25 13:09:36 raspberrypi kernel: [ 4.617675] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jul 25 13:09:36 raspberrypi kernel: [ 4.630654] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 25 13:09:36 raspberrypi kernel: [ 4.644032] usb usb1: Product: DWC OTG Controller
Jul 25 13:09:36 raspberrypi kernel: [ 4.654852] usb usb1: Manufacturer: Linux 3.1.9+ dwc_otg_hcd
Jul 25 13:09:36 raspberrypi kernel: [ 4.666517] usb usb1: SerialNumber: bcm2708_usb
Jul 25 13:09:36 raspberrypi kernel: [ 4.678224] hub 1-0:1.0: USB hub found
Jul 25 13:09:36 raspberrypi kernel: [ 4.688097] hub 1-0:1.0: 1 port detected
Jul 25 13:09:36 raspberrypi kernel: [ 4.699193] usbcore: registered new interface driver uas
Jul 25 13:09:36 raspberrypi kernel: [ 4.710500] Initializing USB Mass Storage driver...
Jul 25 13:09:36 raspberrypi kernel: [ 4.721613] usbcore: registered new interface driver usb-storage
Jul 25 13:09:36 raspberrypi kernel: [ 4.733510] USB Mass Storage support registered.
Jul 25 13:09:36 raspberrypi kernel: [ 4.744381] usbcore: registered new interface driver libusual
Jul 25 13:09:36 raspberrypi kernel: [ 4.756760] mousedev: PS/2 mouse device common for all mice
Jul 25 13:09:36 raspberrypi kernel: [ 4.768431] cpuidle: using governor ladder
Jul 25 13:09:36 raspberrypi kernel: [ 4.778535] cpuidle: using governor menu
Jul 25 13:09:36 raspberrypi kernel: [ 4.788613] sdhci: Secure Digital Host Controller Interface driver
Jul 25 13:09:36 raspberrypi kernel: [ 4.800970] sdhci: Copyright(c) Pierre Ossman
Jul 25 13:09:36 raspberrypi kernel: [ 4.811539] bcm_power_open() -> 1
Jul 25 13:09:36 raspberrypi kernel: [ 4.821731] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
Jul 25 13:09:36 raspberrypi kernel: [ 4.835790] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
Jul 25 13:09:36 raspberrypi kernel: [ 4.847803] sdhci-pltfm: SDHCI platform and OF driver helper
Jul 25 13:09:36 raspberrypi kernel: [ 4.861465] usbcore: registered new interface driver usbhid
Jul 25 13:09:36 raspberrypi kernel: [ 4.873139] usbhid: USB HID core driver
Jul 25 13:09:36 raspberrypi kernel: [ 4.892204] TCP cubic registered
Jul 25 13:09:36 raspberrypi kernel: [ 4.918151] Initializing XFRM netlink socket
Jul 25 13:09:36 raspberrypi kernel: [ 4.939148] NET: Registered protocol family 17
Jul 25 13:09:36 raspberrypi kernel: [ 4.968900] Registering the dns_resolver key type
Jul 25 13:09:36 raspberrypi kernel: [ 4.982982] VFP support v0.3:
Jul 25 13:09:36 raspberrypi kernel: [ 4.988612] mmc0: problem reading SD Status register.
Jul 25 13:09:36 raspberrypi kernel: [ 5.008754] implementor 41 architecture 1 part 20 variant b rev 5
Jul 25 13:09:36 raspberrypi kernel: [ 5.040486] Waiting for root device /dev/mmcblk0p2...
Jul 25 13:09:36 raspberrypi kernel: [ 5.059694] mmc0: new high speed SDHC card at address 0002
Jul 25 13:09:36 raspberrypi kernel: [ 5.071998] mmcblk0: mmc0:0002 00000 7.41 GiB
Jul 25 13:09:36 raspberrypi kernel: [ 5.084512] mmcblk0: p1 p2
Jul 25 13:09:36 raspberrypi kernel: [ 5.168886] usb 1-1: new high speed USB device number 2 using dwc_otg
Jul 25 13:09:36 raspberrypi kernel: [ 5.401804] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jul 25 13:09:36 raspberrypi kernel: [ 5.416093] VFS: Mounted root (ext4 filesystem) on device 179:2.
Jul 25 13:09:36 raspberrypi kernel: [ 5.429629] Freeing init memory: 200K
Jul 25 13:09:36 raspberrypi kernel: [ 5.539825] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
Jul 25 13:09:36 raspberrypi kernel: [ 5.553177] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul 25 13:09:37 raspberrypi kernel: [ 5.567663] hub 1-1:1.0: USB hub found
Jul 25 13:09:37 raspberrypi kernel: [ 5.578565] hub 1-1:1.0: 3 ports detected
Jul 25 13:09:37 raspberrypi kernel: [ 5.869076] usb 1-1.1: new high speed USB device number 3 using dwc_otg
Jul 25 13:09:37 raspberrypi kernel: [ 5.979430] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
Jul 25 13:09:37 raspberrypi kernel: [ 5.992580] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul 25 13:09:37 raspberrypi kernel: [ 6.015975] smsc95xx v1.0.4
Jul 25 13:09:37 raspberrypi kernel: [ 6.084713] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:4b:ee:cf
Jul 25 13:09:37 raspberrypi kernel: [ 14.456833] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jul 25 13:09:37 raspberrypi kernel: [ 14.810293] ### snd_bcm2835_alsa_probe c05d07a0 ############### PROBING FOR bcm2835 ALSA device (0):(1) ###############
Jul 25 13:09:37 raspberrypi kernel: [ 14.842698] Creating card...
Jul 25 13:09:37 raspberrypi kernel: [ 14.852364] Creating device/chip ..
Jul 25 13:09:37 raspberrypi kernel: [ 14.863078] Adding controls ..
Jul 25 13:09:37 raspberrypi kernel: [ 14.872655] Registering card ....
Jul 25 13:09:37 raspberrypi kernel: [ 14.889059] bcm2835 ALSA CARD CREATED!
Jul 25 13:09:37 raspberrypi kernel: [ 14.909928] ### BCM2835 ALSA driver init OK ###
Jul 25 13:09:37 raspberrypi kernel: [ 21.649656] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
Jul 25 13:09:40 raspberrypi kernel: [ 30.003048] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SS
Jul 25 13:36:02 raspberrypi shutdown[1666]: shutting down for system reboot
Jul 25 13:47:13 raspberrypi shutdown[1851]: shutting down for system reboot
debug:

Code: Alles auswählen

Jul 15 19:42:30 raspberrypi kernel: [ 0.000000] On node 0 totalpages: 49152
Jul 15 19:42:30 raspberrypi kernel: [ 0.000000] free_area_init_node: node 0, pgdat c05f7c4c, node_mem_map c06c8000
Jul 15 19:42:30 raspberrypi kernel: [ 0.000000] Normal zone: 384 pages used for memmap
Jul 15 19:42:30 raspberrypi kernel: [ 0.000000] Normal zone: 0 pages reserved
Jul 15 19:42:30 raspberrypi kernel: [ 0.000000] Normal zone: 48768 pages, LIFO batch:15
Jul 15 19:42:30 raspberrypi kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jul 15 19:42:30 raspberrypi kernel: [ 0.000000] pcpu-alloc: [0] 0
Jul 15 19:42:30 raspberrypi kernel: [ 4.800463] Module dwc_common_port init
Jul 15 19:42:30 raspberrypi kernel: [ 4.922786] Registered led device: mmc0::
Jul 15 19:42:30 raspberrypi kernel: [ 4.962520] Registered led device: led0
Jul 18 21:44:46 raspberrypi kernel: [ 0.000000] On node 0 totalpages: 49152
Jul 18 21:44:46 raspberrypi kernel: [ 0.000000] free_area_init_node: node 0, pgdat c05f7c4c, node_mem_map c06c8000
Jul 18 21:44:46 raspberrypi kernel: [ 0.000000] Normal zone: 384 pages used for memmap
Jul 18 21:44:46 raspberrypi kernel: [ 0.000000] Normal zone: 0 pages reserved
Jul 18 21:44:46 raspberrypi kernel: [ 0.000000] Normal zone: 48768 pages, LIFO batch:15
Jul 18 21:44:46 raspberrypi kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jul 18 21:44:46 raspberrypi kernel: [ 0.000000] pcpu-alloc: [0] 0
Jul 18 21:44:46 raspberrypi kernel: [ 4.550863] Module dwc_common_port init
Jul 18 21:44:46 raspberrypi kernel: [ 4.673360] Registered led device: mmc0::
Jul 18 21:44:46 raspberrypi kernel: [ 4.713216] Registered led device: led0
Jul 18 21:49:29 raspberrypi kernel: [ 0.000000] On node 0 totalpages: 49152
Jul 18 21:49:29 raspberrypi kernel: [ 0.000000] free_area_init_node: node 0, pgdat c05f7c4c, node_mem_map c06c8000
Jul 18 21:49:29 raspberrypi kernel: [ 0.000000] Normal zone: 384 pages used for memmap
Jul 18 21:49:29 raspberrypi kernel: [ 0.000000] Normal zone: 0 pages reserved
Jul 18 21:49:29 raspberrypi kernel: [ 0.000000] Normal zone: 48768 pages, LIFO batch:15
Jul 18 21:49:29 raspberrypi kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jul 18 21:49:29 raspberrypi kernel: [ 0.000000] pcpu-alloc: [0] 0
Jul 18 21:49:29 raspberrypi kernel: [ 4.542228] Module dwc_common_port init
Jul 18 21:49:29 raspberrypi kernel: [ 4.664690] Registered led device: mmc0::
Jul 18 21:49:29 raspberrypi kernel: [ 4.704527] Registered led device: led0
Jul 18 21:51:39 raspberrypi kernel: [ 0.000000] On node 0 totalpages: 49152
Jul 18 21:51:39 raspberrypi kernel: [ 0.000000] free_area_init_node: node 0, pgdat c05f7c4c, node_mem_map c06c8000
Jul 18 21:51:39 raspberrypi kernel: [ 0.000000] Normal zone: 384 pages used for memmap
Jul 18 21:51:39 raspberrypi kernel: [ 0.000000] Normal zone: 0 pages reserved
Jul 18 21:51:39 raspberrypi kernel: [ 0.000000] Normal zone: 48768 pages, LIFO batch:15
Jul 18 21:51:39 raspberrypi kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jul 18 21:51:39 raspberrypi kernel: [ 0.000000] pcpu-alloc: [0] 0
Jul 18 21:51:39 raspberrypi kernel: [ 4.698266] Module dwc_common_port init
Jul 18 21:51:39 raspberrypi kernel: [ 4.820805] Registered led device: mmc0::
Jul 18 21:51:39 raspberrypi kernel: [ 4.860664] Registered led device: led0
Jul 18 21:52:09 raspberrypi kernel: [ 0.000000] On node 0 totalpages: 49152
Jul 18 21:52:09 raspberrypi kernel: [ 0.000000] free_area_init_node: node 0, pgdat c05f7c4c, node_mem_map c06c8000
Jul 18 21:52:09 raspberrypi kernel: [ 0.000000] Normal zone: 384 pages used for memmap
Jul 18 21:52:09 raspberrypi kernel: [ 0.000000] Normal zone: 0 pages reserved
Jul 18 21:52:09 raspberrypi kernel: [ 0.000000] Normal zone: 48768 pages, LIFO batch:15
Jul 18 21:52:09 raspberrypi kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jul 18 21:52:09 raspberrypi kernel: [ 0.000000] pcpu-alloc: [0] 0
Jul 18 21:52:09 raspberrypi kernel: [ 4.691216] Module dwc_common_port init
Jul 18 21:52:09 raspberrypi kernel: [ 4.813689] Registered led device: mmc0::
Jul 18 21:52:09 raspberrypi kernel: [ 4.853456] Registered led device: led0
dmesg:

Code: Alles auswählen

/var/log/dmesg:
[11:47:39 25.07.2012] Initializing cgroup subsys cpu
[11:47:39 25.07.2012] Linux version 3.1.9+ (dc4@dc4-arm-01) (gcc version 4.5.1 (Broadcom-2708) ) #168 PREEMPT Sat Jul 14 18:56:31 BST 2012
[11:47:39 25.07.2012] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[11:47:39 25.07.2012] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[11:47:39 25.07.2012] Machine: BCM2708
[11:47:39 25.07.2012] Memory policy: ECC disabled, Data cache writeback
[11:47:39 25.07.2012] On node 0 totalpages: 49152
[11:47:39 25.07.2012] free_area_init_node: node 0, pgdat c05f7c4c, node_mem_map c06c8000
[11:47:39 25.07.2012] Normal zone: 384 pages used for memmap
[11:47:39 25.07.2012] Normal zone: 0 pages reserved
[11:47:39 25.07.2012] Normal zone: 48768 pages, LIFO batch:15
[11:47:39 25.07.2012] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[11:47:39 25.07.2012] pcpu-alloc: [0] 0
[11:47:39 25.07.2012] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48768
[11:47:39 25.07.2012] Kernel command line: dma.dmachans=0x3c bcm2708_fb.fbwidth=1184 bcm2708_fb.fbheight=928 bcm2708.boardrev=0x2 bcm2708.serial=0xb34beecf smsc95xx.macaddr=B8:27:EB:4B:EE:CF dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
[11:47:39 25.07.2012] PID hash table entries: 1024 (order: 0, 4096 bytes)
[11:47:39 25.07.2012] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[11:47:39 25.07.2012] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[11:47:39 25.07.2012] Memory: 192MB = 192MB total
[11:47:39 25.07.2012] Memory: 187880k/187880k available, 8728k reserved, 0K highmem
[11:47:39 25.07.2012] Virtual kernel memory layout:
[11:47:39 25.07.2012] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[11:47:39 25.07.2012] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[11:47:39 25.07.2012] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[11:47:39 25.07.2012] vmalloc : 0xcc800000 - 0xd8000000 ( 184 MB)
[11:47:39 25.07.2012] lowmem : 0xc0000000 - 0xcc000000 ( 192 MB)
[11:47:39 25.07.2012] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[11:47:39 25.07.2012] .text : 0xc0008000 - 0xc05943d0 (5681 kB)
[11:47:39 25.07.2012] .init : 0xc0595000 - 0xc05c7000 ( 200 kB)
[11:47:39 25.07.2012] .data : 0xc05c8000 - 0xc05f93b8 ( 197 kB)
[11:47:39 25.07.2012] .bss : 0xc05f93dc - 0xc06c7504 ( 825 kB)
[11:47:39 25.07.2012] NR_IRQS:245
[11:47:39 25.07.2012] timer_set_mode: unhandled mode:1
[11:47:39 25.07.2012] timer_set_mode: unhandled mode:3
[11:47:39 25.07.2012] Console: colour dummy device 80x30
[11:47:39 25.07.2012] console [tty1] enabled
[11:47:41 25.07.2012] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[11:47:41 25.07.2012] pid_max: default: 32768 minimum: 301
[11:47:41 25.07.2012] Mount-cache hash table entries: 512
[11:47:41 25.07.2012] Initializing cgroup subsys cpuacct
[11:47:41 25.07.2012] Initializing cgroup subsys devices
[11:47:41 25.07.2012] Initializing cgroup subsys freezer
[11:47:41 25.07.2012] Initializing cgroup subsys blkio
[11:47:41 25.07.2012] CPU: Testing write buffer coherency: ok
[11:47:41 25.07.2012] ftrace: allocating 14801 entries in 44 pages
[11:47:42 25.07.2012] hw perfevents: enabled with v6 PMU driver, 3 counters available
[11:47:42 25.07.2012] devtmpfs: initialized
[11:47:42 25.07.2012] NET: Registered protocol family 16
[11:47:42 25.07.2012] vc-mem: mm_vc_mem_phys_addr = 0x00000000
[11:47:42 25.07.2012] vc-mem: mm_vc_mem_size = 0x10000000 (256 MiB)
[11:47:42 25.07.2012] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[11:47:42 25.07.2012] hw-breakpoint: maximum watchpoint size is 4 bytes.
[11:47:42 25.07.2012] mailbox: Broadcom VideoCore Mailbox driver
[11:47:42 25.07.2012] bcm2708_vcio: mailbox at f200b880
[11:47:42 25.07.2012] bcm_power: Broadcom power driver
[11:47:42 25.07.2012] bcm_power_open() -> 0
[11:47:42 25.07.2012] bcm_power_request(0, 8)
[11:47:42 25.07.2012] bcm_mailbox_read -> 00000080, 0
[11:47:42 25.07.2012] bcm_power_request -> 0
[11:47:42 25.07.2012] Serial: AMBA PL011 UART driver
[11:47:42 25.07.2012] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[11:47:42 25.07.2012] console [ttyAMA0] enabled
[11:47:42 25.07.2012] bio: create slab at 0
[11:47:42 25.07.2012] SCSI subsystem initialized
[11:47:42 25.07.2012] usbcore: registered new interface driver usbfs
[11:47:42 25.07.2012] usbcore: registered new interface driver hub
[11:47:42 25.07.2012] usbcore: registered new device driver usb
[11:47:42 25.07.2012] Switching to clocksource stc
[11:47:42 25.07.2012] Switched to NOHz mode on CPU #0
[11:47:42 25.07.2012] FS-Cache: Loaded
[11:47:42 25.07.2012] CacheFiles: Loaded
[11:47:42 25.07.2012] NET: Registered protocol family 2
[11:47:42 25.07.2012] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[11:47:42 25.07.2012] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[11:47:42 25.07.2012] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[11:47:42 25.07.2012] TCP: Hash tables configured (established 8192 bind 8192)
[11:47:42 25.07.2012] TCP reno registered
[11:47:42 25.07.2012] UDP hash table entries: 256 (order: 0, 4096 bytes)
[11:47:42 25.07.2012] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[11:47:42 25.07.2012] NET: Registered protocol family 1
[11:47:42 25.07.2012] RPC: Registered named UNIX socket transport module.
[11:47:42 25.07.2012] RPC: Registered udp transport module.
[11:47:42 25.07.2012] RPC: Registered tcp transport module.
[11:47:43 25.07.2012] RPC: Registered tcp NFSv4.1 backchannel transport module.
[11:47:43 25.07.2012] bcm2708_dma: DMA manager at cc808000
[11:47:43 25.07.2012] bcm2708_gpio: bcm2708_gpio_probe c05d00e0
[11:47:43 25.07.2012] vc-mem: Videocore memory driver
[11:47:43 25.07.2012] audit: initializing netlink socket (disabled)
[11:47:43 25.07.2012] type=2000 audit(0.780:1): initialized
[11:47:43 25.07.2012] VFS: Disk quotas dquot_6.5.2
[11:47:43 25.07.2012] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[11:47:43 25.07.2012] FS-Cache: Netfs 'nfs' registered for caching
[11:47:43 25.07.2012] msgmni has been set to 366
[11:47:43 25.07.2012] io scheduler noop registered
[11:47:43 25.07.2012] io scheduler deadline registered (default)
[11:47:43 25.07.2012] io scheduler cfq registered
[11:47:43 25.07.2012] BCM2708FB: registering framebuffer (1184x928@16)
[11:47:43 25.07.2012] bcm2708_fb_set_par info(cb8ec400) 1184x928 (1184x928), 0, 16
[11:47:43 25.07.2012] BCM2708FB: start = ccc00000,4d385000 width=1184, height=928, bpp=16, pitch=2368 size=2197504 success=0
[11:47:43 25.07.2012] Console: switching to colour frame buffer device 148x58
[11:47:43 25.07.2012] BCM2708FB: register framebuffer (0)
[11:47:43 25.07.2012] kgdb: Registered I/O driver kgdboc.
[11:47:43 25.07.2012] brd: module loaded
[11:47:43 25.07.2012] loop: module loaded
[11:47:43 25.07.2012] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
[11:47:43 25.07.2012] vcos: [1]: vchiq_init_state: called
[11:47:43 25.07.2012] vcos: [1]: vchiq: initialised - version 2 (min 2), device 253.0
[11:47:43 25.07.2012] usbcore: registered new interface driver smsc95xx
[11:47:43 25.07.2012] cdc_ncm: 04-Aug-2011
[11:47:43 25.07.2012] usbcore: registered new interface driver cdc_ncm
[11:47:43 25.07.2012] dwc_otg: version 2.90b 6-MAY-2010 (platform bus)
[11:47:43 25.07.2012] Core Release: 2.80a
[11:47:43 25.07.2012] Setting default values for core params
[11:47:43 25.07.2012] Finished setting default values for core params
[11:47:43 25.07.2012] cc840008 -> 1
[11:47:43 25.07.2012] Using Buffer DMA mode
[11:47:43 25.07.2012] Periodic Transfer Interrupt Enhancement - disabled
[11:47:43 25.07.2012] Multiprocessor Interrupt Enhancement - disabled
[11:47:43 25.07.2012] dwc_otg bcm2708_usb: DWC OTG Controller
[11:47:43 25.07.2012] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[11:47:43 25.07.2012] dwc_otg bcm2708_usb: irq 75, io mem 0x00000000
[11:47:43 25.07.2012] Init: Port Power? op_state=1
[11:47:43 25.07.2012] Init: Power Port (0)
[11:47:43 25.07.2012] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[11:47:43 25.07.2012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[11:47:43 25.07.2012] usb usb1: Product: DWC OTG Controller
[11:47:43 25.07.2012] usb usb1: Manufacturer: Linux 3.1.9+ dwc_otg_hcd
[11:47:43 25.07.2012] usb usb1: SerialNumber: bcm2708_usb
[11:47:43 25.07.2012] hub 1-0:1.0: USB hub found
[11:47:43 25.07.2012] hub 1-0:1.0: 1 port detected
[11:47:43 25.07.2012] Module dwc_common_port init
[11:47:43 25.07.2012] usbcore: registered new interface driver uas
[11:47:43 25.07.2012] Initializing USB Mass Storage driver...
[11:47:43 25.07.2012] usbcore: registered new interface driver usb-storage
[11:47:43 25.07.2012] USB Mass Storage support registered.
[11:47:43 25.07.2012] usbcore: registered new interface driver libusual
[11:47:43 25.07.2012] mousedev: PS/2 mouse device common for all mice
[11:47:43 25.07.2012] cpuidle: using governor ladder
[11:47:43 25.07.2012] cpuidle: using governor menu
[11:47:43 25.07.2012] sdhci: Secure Digital Host Controller Interface driver
[11:47:43 25.07.2012] sdhci: Copyright(c) Pierre Ossman
[11:47:43 25.07.2012] bcm_power_open() -> 1
[11:47:43 25.07.2012] Registered led device: mmc0::
[11:47:43 25.07.2012] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[11:47:43 25.07.2012] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[11:47:43 25.07.2012] sdhci-pltfm: SDHCI platform and OF driver helper
[11:47:43 25.07.2012] Registered led device: led0
[11:47:43 25.07.2012] usbcore: registered new interface driver usbhid
[11:47:43 25.07.2012] usbhid: USB HID core driver
[11:47:43 25.07.2012] TCP cubic registered
[11:47:43 25.07.2012] Initializing XFRM netlink socket
[11:47:43 25.07.2012] NET: Registered protocol family 17
[11:47:43 25.07.2012] Registering the dns_resolver key type
[11:47:43 25.07.2012] VFP support v0.3:
[11:47:43 25.07.2012] mmc0: problem reading SD Status register.
[11:47:44 25.07.2012] implementor 41 architecture 1 part 20 variant b rev 5
[11:47:44 25.07.2012] Waiting for root device /dev/mmcblk0p2...
[11:47:44 25.07.2012] mmc0: new high speed SDHC card at address 0002
[11:47:44 25.07.2012] mmcblk0: mmc0:0002 00000 7.41 GiB
[11:47:44 25.07.2012] mmcblk0: p1 p2
[11:47:44 25.07.2012] usb 1-1: new high speed USB device number 2 using dwc_otg
[11:47:44 25.07.2012] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[11:47:44 25.07.2012] VFS: Mounted root (ext4 filesystem) on device 179:2.
[11:47:44 25.07.2012] Freeing init memory: 200K
[11:47:44 25.07.2012] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[11:47:44 25.07.2012] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[11:47:44 25.07.2012] hub 1-1:1.0: USB hub found
[11:47:44 25.07.2012] hub 1-1:1.0: 3 ports detected
[11:47:44 25.07.2012] usb 1-1.1: new high speed USB device number 3 using dwc_otg
[11:47:44 25.07.2012] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[11:47:44 25.07.2012] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[11:47:45 25.07.2012] smsc95xx v1.0.4
[11:47:45 25.07.2012] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:4b:ee:cf
[11:47:53 25.07.2012] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[11:47:53 25.07.2012] ### snd_bcm2835_alsa_probe c05d07a0 ############### PROBING FOR bcm2835 ALSA device (0):(1) ###############
[11:47:53 25.07.2012] Creating card...
[11:47:53 25.07.2012] Creating device/chip ..
[11:47:53 25.07.2012] Adding controls ..
[11:47:53 25.07.2012] Registering card ....
[11:47:53 25.07.2012] bcm2835 ALSA CARD CREATED!
[11:47:53 25.07.2012] ### BCM2835 ALSA driver init OK ###
[11:48:00 25.07.2012] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
Das vom Bildschirm muss ich erst abschreiben. Komt aber ...

FG
Nach oben
Antworten

Zurück zu „Support“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 0 Gäste