Bislang lief alles ohne Probleme. Seit 3 Tagen habe ich auf Sky HD Freezer eben sogar auf MTV HD Bildaussetzer von 2-3 Minuten.
Ich habe nun mal die Server Cccam auf 2.3.0 geupdatet, ich dachte vielleicht bringt das was, aber nein, nix.
Bin auch gleich wieder zurück auf auf 2.1.3 da ich nicht mehr auf das Interface zugreifen konnte.
Meine Frage wurde von Seiten Sky was umgestellt oder ist der Fehler bei meinem Igel zu suchen ?
hier meine CCcam.cfg
Spoiler
Show
Code: Alles auswählen
F: xxxxxxxxxx yyyyy 2 0 0 { 0:0:2 }
F: Jxxxxxxxxxxxxxx yyyy 2 0 0 { 0:0:2 }
F: xxxxxxxxxxxxxxx yyyyyyy 2 0 0 { 0:0:2 }
F: xxxxxxxxxxxxxxx yyyyyy 2 0 0 { 0:0:2 }
F: xxxxxxxxxxxxxxx yyyyyyyyyyy 2 0 0 { 0:0:2 }
F: xxxxxxxxxxxxxxxx yyyyyyyyyyyy 2 0 0 { 0:0:2 }
F: xxxxxxxxxxxxxxxxxxxxxxx yyyyyyyyyyyyyyyyyyy 2 0 0 { 0:0:2 }
F: xxxxxxxxxxxxxxxWohnzimmer DBox2
F: xxxxxxxxxxxxxxxxxxx yyyyyyyyyyyyy 2 0 0 { 0:0:2 }
F: xxxxxxxxxxxxxxxxxxxxx yyyyyyyyyyyyyyy 2 0 0 { 0:0:2 }
F: xxxxxxxxxxxxxxx yyyyyyyyyyyyy 2 0 0 { 0:0:2 }
F: xxxxxxxxxxxxxxxx yyyyyyyyyyyyyyyyyy DBox2
F: xxxxxxxxxxxxxxx yyyyyyyyyyyyyyy 2 0 0 { 0:0:2 }
F: xxxxxxxxxxxxxxxxx yyyyyyyyy 2 0 0 { 0:0:2 }
F: xxxxxxxxxxxxxxxxxx yyyyyyyyyyyyyy 2 0 0 { 0:0:2 }
#
CAID PRIO FILE : /var/keys/CCcam.prio
PROVIDERINFO FILE : /var/keys/CCcam.providers
CHANNELINFO FILE : /var/keys/CCcam.channelinfo
#
SERVER LISTEN PORT : 35250
#
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME : cccam
WEBINFO PASSWORD : cccam
#
#
#SERIAL READER : /dev/ttyUSB0 phoenix
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
SMARTCARD SID ASSIGN : /dev/ttyUSB0 0 { 0008,0009,000A,000B,000C,000D,000E,0010,0011,0013,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,0021,0022,0023,0024,
0025,0026,0027,0029,002A,002B,0032,0034,001E,0037,0038,0039,003A,003C,003D,003E,003F,0040,0041,0042,0043,0044,0046,0069,0070,0071,
0072,0073,006A,006B,006C,,006D,006E,006F,0074,0075,0076,0077,0078,0079,007A,007B,007C,007D,007E,007F,0080,0081,0082,0083,0084,00A8,00DD,00DE,00DF,00FB,00F2,00FC,00FD,00FE,0105,
0106,0107,010F,0110,0111,0119,011A,011B,0123,0124,0125,012D,012E,012F,0137,0138,0139,0141,0142,0143,014B,014C,014D,014E,0156,0159,
0160,0163,016B,016D,0175,0201,0203,0204,0206,07FF,2EFE,3331,4461,4462,6FB8,6FF1,7001,7009,700A }
#
#
#SMARTCARD SID ASSIGN: /dev/ttyUSB0 0 { 8, 9, a, b, c, d, e, f, 10, 10b, 10c, 11, 12, 12a, 13, 13e, 14, 15, 16, 17, 18, 19, 1a, 1b, 1c, 1d, 1e, 21, 22, 23, 24, 25, 26, 27, 29, 2a, 2b, 32, 34, 37, 38, 39, 3a, 3b, 69, 6a, 6b, 6c, 6e, 6f, 70, 71, 72, 74, 75, 76, 77, 78, 79, 80, 7a, 7b, 7c, 7d, 7e, 7f, 81, 82, 83, 84, a8, dd, de, df, f2, fb, fc, fd, fe, 105, 106, 107, 108, 10f, 110, 111, 115, 116, 119, 120, 11a, 11b, 11f, 123, 124, 125, 129, 12d, 12e, 12f, 13d, 133, 134, 137, 138, 139, 141, 142, 143, 147, 148, 14b, 14c, 14d, 15b, 15c, 151, 152, 156, 159, 160, 163, 16b, 16d, 175, 201, 203, 204, 206, 7ff, 2efe, 3331, 4461, 4462, 6fb8, 7001, 700a }
#
#
SERIAL READER : /dev/ttyUSB0 smartreader+
#SERIAL READER : /dev/ttyUSB1 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB1 6000000
TRY ALL CHIDS:/dev/ttyUSB0
#TRY ALL CHIDS:/dev/ttyUSB1
#
#Allgemeine Einstellungen
ALLOW TELNETINFO: no # Ansonsten ist PORT 16000 offen
MINIMUM DOWNHOPS: 1 # Nur Karten annehmen die weitergegeben koennen
DISABLE EMM : no # Ansonsten kommen keine Updates auf die Karten
EXTRA EMM LEVEL : no # EMM-Updates von HOP2 Clients werden angenommen
SHOW TIMING : yes # Antwortzeiten der Karten anzeigenSpoiler
Show
Code: Alles auswählen
Last Logins:
root pts/0 rappi.fritz.box Thu Jan 2 14:09 - 14:11 (00:02)
reboot system boot 2.6.32-5-486 Thu Jan 2 14:04 - 14:38 (00:34)
root pts/0 rappi.fritz.box Thu Jan 2 14:00 - down (00:02)
root pts/0 rappi.fritz.box Thu Jan 2 13:57 - 14:00 (00:02)
root pts/0 rappi.fritz.box Thu Jan 2 13:55 - 13:56 (00:00)
root pts/0 rappi.fritz.box Thu Jan 2 13:45 - 13:47 (00:02)
root pts/0 rappi.fritz.box Thu Jan 2 13:28 - 13:32 (00:03)
reboot system boot 2.6.32-5-486 Wed Jan 1 14:15 - 14:02 (23:47)
root pts/0 rappi.fritz.box Sat Dec 14 14:43 - down (00:00)
wtmp begins Sat Dec 14 14:43:58 2013
