IPC

Code: Alles auswählen

#!/bin/bash

set -o nounset
set -o errexit

UPDATE=${UPDATE:-1}
UPDATE_URI="https://github.com/Hexxeh/rpi-update/raw/master/rpi-update"

ROOT_PATH=${ROOT_PATH:-"/"}
BOOT_PATH=${BOOT_PATH:-"/boot"}
SKIP_KERNEL=${SKIP_KERNEL:-0}
FW_REPO="git://github.com/Hexxeh/rpi-firmware.git"
FW_REPOLOCAL="${ROOT_PATH}/root/.rpi-firmware"
FW_PATH="${BOOT_PATH}"
FW_MODPATH="${ROOT_PATH}/lib/modules"
FW_RAM=${1:-0}
GITCMD="git --git-dir=\"${FW_REPOLOCAL}/.git\" --work-tree=\"${FW_REPOLOCAL}\""

function detect_split() {
	if [[ -f "$FW_PATH/start.elf" && ${FW_RAM} -eq 0 ]]; then
		echo "Autodetecting memory split"
		FW_RAM=224
		for R in 128 192 224
		do
			if [[ -f "$FW_PATH/arm${R}_start.elf" ]]
			then
      				if diff "$FW_PATH/arm${R}_start.elf" "$FW_PATH/start.elf" >/dev/null
      				then
        				FW_RAM=$R
        				break
      				fi
			fi
		done
	fi
	FW_GPU=$((256-FW_RAM))
}

function update_self() {
	echo "Performing self-update"
	_tempFileName="$0.tmp"

	if ! wget --quiet --output-document="${_tempFileName}" "${UPDATE_URI}"; then
		echo "Failed to download update for rpi-update!"
		echo "Make sure you have ca-certificates installed and that the time is set correctly"
		exit 1
	fi

	OCTAL_MODE=$(stat -c '%a' "$0")
	if ! chmod ${OCTAL_MODE} "${_tempFileName}" ; then
  		echo "Failed: Error while trying to set mode on ${_tempFileName}"
		exit 1
	fi

	cat > /tmp/updateScript.sh << EOF
	#!/bin/bash
	if mv "${_tempFileName}" "$0"; then
		rm -- "\$0"
		exec env UPDATE=0 /bin/bash "$0" "$FW_RAM"
	else
		echo "Failed!"
	fi
EOF

	exec /bin/bash /tmp/updateScript.sh
}

function update_modules {
	if [[ ${SKIP_KERNEL} -eq 0 ]]; then
		cp -R "${FW_REPOLOCAL}/modules/"* "${FW_MODPATH}/"
		find "${FW_REPOLOCAL}/modules" -mindepth 1 -maxdepth 1 -type d | while read DIR; do
			depmod -b "${ROOT_PATH}" -a $(basename "${DIR}")
		done
	fi
}

function update_sdk {
	if [[ -f /etc/init.d/vcfiled ]]; then
		/etc/init.d/vcfiled stop
	fi

	ELFOUTPUT=$(readelf -a "${ROOT_PATH}/bin/bash")
	if [ "${ELFOUTPUT}" != "${ELFOUTPUT/VFP_args/}" ]; then
		echo "Using HardFP libraries"
		cp -R "${FW_REPOLOCAL}/vc/hardfp/"* "${ROOT_PATH}/"
	else
		echo "Using SoftFP libraries"
		cp -R "${FW_REPOLOCAL}/vc/softfp/"* "${ROOT_PATH}/"
	fi
	cp -R "${FW_REPOLOCAL}/vc/sdk/"* "${ROOT_PATH}/"

	if [[ -f /etc/init.d/vcfiled ]]; then
		/etc/init.d/vcfiled start
	fi
}

function set_split {
	cp "${FW_PATH}/arm${FW_RAM}_start.elf" "${FW_PATH}/start.elf"
}

function update_firmware {
	cp "${FW_REPOLOCAL}/"*.elf "${FW_PATH}/"
	cp "${FW_REPOLOCAL}/"*.bin "${FW_PATH}/"
	if [[ ${SKIP_KERNEL} -eq 0 ]]; then
		cp "${FW_REPOLOCAL}/"*.img "${FW_PATH}/"
	else
		echo "Skipping kernel/modules updated as requested"
	fi
}

function finalise {
	ldconfig -r "${ROOT_PATH}"
	eval ${GITCMD} rev-parse master > "${FW_PATH}/.firmware_revision"
	sync
}

function download_repo {
	echo "Setting up firmware (this will take a few minutes)"
	mkdir -p "${FW_REPOLOCAL}"
	git clone "${FW_REPO}" "${FW_REPOLOCAL}" --depth=1 --quiet
	RETVAL=$?
	if [[ ${RETVAL} -ne 0 ]]; then
		echo "Failed to download new firmware files"
		exit 1
	fi
}

function update_repo {
	echo "Updating firmware (this will take a few minutes)"
	eval ${GITCMD} fetch --quiet
	RETVAL=$?
	if [[ ${RETVAL} -ne 0 ]]; then
		echo "Failed to download updated firmware files"
		exit 1
	fi
	eval ${GITCMD} merge origin/master -m "automerge" --quiet
	RETVAL=$?
	if [[ ${RETVAL} -ne 0 ]]; then
		echo "Failed to download updated firmware files"
		exit 1
	fi
}

function do_backup {
	cp -a "${FW_PATH}" "${FW_PATH}.bak"
	cp -a "${FW_MODPATH}" "${FW_MODPATH}.bak"
}

function do_update {
	update_firmware
	update_modules
	update_sdk
	set_split
	finalise
	echo "If no errors appeared, your firmware was successfully $1"
	if [[ "${ROOT_PATH}" == "/" ]]; then
		echo "A reboot is needed to activate the new firmware"
	fi
}

if [[ ${EUID} -ne 0 ]]; then
	echo "This tool must be run as root"
	exit 1
fi

if [[ ${UPDATE} -ne 0 ]]; then
	echo "Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS"
	update_self
fi

if [[ ( "${ROOT_PATH}" == "/"  &&  "${BOOT_PATH}" != "/boot" ) ]] ||
[[ ( "${BOOT_PATH}" == "/boot"  &&  "${ROOT_PATH}" != "/" ) ]]; then
	echo "You need to specify both ROOT_PATH and BOOT_PATH, or neither"
	exit 1
fi

if [[ ! -d "${FW_PATH}" ]]; then
	echo "${FW_PATH} doesn't exist"
	exit 1
fi
if [[ ! -f "${FW_PATH}/start.elf" ]]; then
	echo "${FW_PATH}/start.elf doesn't exist."
	exit 1
fi
if [[ ! -d "${FW_MODPATH}" ]]; then
	echo "${FW_MODPATH} doesn't exist"
	exit 1
fi

command -v git >/dev/null 2>&1 || {
	echo "This tool requires you have Git installed, please install it first"
	echo "In Debian, try: sudo apt-get install git-core"
	echo "In Arch, try: pacman -S git"
	exit 1
}

command -v readelf >/dev/null 2>&1 || {
	echo "This tool requires you have readelf installed, please install it first"
	echo "In Debian, try: sudo apt-get install binutils"
	echo "In Arch, try: pacman -S binutils"
	exit 1
}

detect_split
if [[ ${FW_RAM} -ne 224 ]] && [[ ${FW_RAM} -ne 192 ]] && [[ ${FW_RAM} -ne 128 ]]; then
	echo "RAM value must be one of: 224, 192, 128"
	exit 1
fi
echo "Using ARM/GPU memory split of ${FW_RAM}MB/${FW_GPU}MB"

if [[ -f "${FW_REPOLOCAL}/.git/config" ]]; then
	update_repo
	if [[ -f "${FW_PATH}/.firmware_revision" ]] && [[ $(cat "${FW_PATH}/.firmware_revision") == $(eval ${GITCMD} rev-parse master) ]]; then
		echo "Your firmware is already up to date"
		set_split
		finalise
	else
		do_update "updated"
	fi
else
	echo "We're running for the first time"
	download_repo
	do_backup
	do_update "setup"
fi