System neu aufgesetzt - nix geht mehr

[Princos]

@ feissmaik

Nachdem sich meine CF-Karte verabschiedet hat, habe ich eine neue CF mit Debian 6.0.3 mit Kernel 2.6.32-5-686 (SMP) installiert. Dann den aktuellen IPC installiert. Danach habe ich die gesicherten Konfigs eingespielt. Nun werden die Karten nicht mehr erkannt! Ich glaube, ich sehe den Wald vor lauter Bäumen nicht mehr?

bitte um Hilfe

Siemens Futro S300
2 Smargos
1 x HDplus
1 x ORF ICE

Cccam 2.1.3
OSCAM 1.00 build #3228 (diese Version lief im alten System problemlos)

Spoiler

Show

#cccam.cfg

N: 127.0.0.1 34001 tester tester1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 # Oscam Verbindung
L: 127.0.0.1 36001 orftester orftester2 0D95 000000 256

# oscam.conf generated automatically by Streamboard OSCAM 1.00 build #3228
# Read more: http://streamboard.gmc.to/oscam/browser ... m.conf.txt

[global]
serverip = 127.0.0.1
logfile = /var/log/ipc/OScam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 2048
waitforcards = 1
preferlocalcards = 1
saveinithistory = 0
readerrestartseconds = 5
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
resolvegethostbyname = 0

[monitor]
port = 988
nocrypt = 127.0.0.1-255.255.255.0
aulow = 120
hideclient_to = 30
monlevel = 1
appendchaninfo = 1

[newcamd]
port = 34001@1830:003411
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[cs357x]
port = 36001

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0

#oscam.server

[reader]
label = HDplus
#Protocol = mouse
protocol = smartreader
detect = CD
device = Serial:Reader 7495AE2 # mit lsusb -v ausgelesen

group = 1
emmcache = 1,3,2
n3_rsakey = BFXXXXXXXXXXD5
n3_boxkey = A76XXXXXXXXX7C
cardmhz = 357
mhz = 357


[reader]
label = orf
protocol = smartreader
detect = CD
device = Serial:Reader AF7C08A # mit lsusb -v ausgelesen
EMMCache = 1,3,2
caid = 0D95
Services = ORF
Group = 2
cardmhz = 368
mhz = 368

# oscam.user generated automatically by Streamboard OSCAM 1.00 build #3228
# Read more: http://streamboard.gmc.to/oscam/browser ... m.user.txt

[account]
user = tester
pwd = tester1
disabled = 0
expdate =
group = 1
hostname =
uniq = 0
sleep = 0
monlevel = 1
au = hdplus
services = hdplus
caid = 1830
betatunnel =
ident =
chid =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

[account]
user = orftester
pwd = orftester2
disabled = 0
expdate =
group = 2
hostname =
uniq = 0
sleep = 0
monlevel = 1
au = orf
services = orf
caid = 0D95
betatunnel =
ident =
chid =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Nov 26 10:02:47 2011
-------------------------------------------------------------------------------
2011/11/26 10:02:47 1254 s version=1.00, build #3228, system=i686-pc-linux, nice=-1
2011/11/26 10:02:47 1254 s max. clients=509, client max. idle=120 sec
2011/11/26 10:02:47 1254 s max. logsize=2048 Kb
2011/11/26 10:02:47 1254 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/11/26 10:02:47 1254 s shared memory initialized (size=4340618, id=0)
2011/11/26 10:02:47 1254 s auth size=4772
2011/11/26 10:02:47 1254 s services reloaded: 0 services freed, 2 services loaded
2011/11/26 10:02:47 1254 s userdb reloaded: 0 accounts freed, 2 accounts loaded, 0 expired, 0 disabled
2011/11/26 10:02:47 1254 s signal handling initialized (type=sysv)
2011/11/26 10:02:47 1254 s 25 service-id's loaded
2011/11/26 10:02:47 1254 s 142 tier-id's loaded
2011/11/26 10:02:47 1254 s 352 provid's loaded
2011/11/26 10:02:47 1257 s monitor: initialized (fd=6, port=988, ip=127.0.0.1)
2011/11/26 10:02:47 1257 s camd 3.3x: disabled
2011/11/26 10:02:47 1257 s camd 3.5x: initialized (fd=7, port=36001, ip=127.0.0.1)
2011/11/26 10:02:47 1257 s cs378x: disabled
2011/11/26 10:02:47 1257 s newcamd: initialized (fd=8, port=34001, ip=127.0.0.1, crypted)
2011/11/26 10:02:47 1257 s CAID: 1830
2011/11/26 10:02:47 1257 s provid #0: 003411
2011/11/26 10:02:47 1257 s cccam: disabled
2011/11/26 10:02:47 1257 s radegast: disabled
2011/11/26 10:02:47 1257 s logger started (pid=1259)
2011/11/26 10:02:47 1257 s http started (pid=1260)
2011/11/26 10:02:47 1257 s reader started (pid=1261, device=Serial:Reader 7495AE2, detect=cd, mhz=357, cardmhz=357)
2011/11/26 10:02:47 1257 s reader started (pid=1262, device=Serial:Reader AF7C08A, detect=cd, mhz=368, cardmhz=368)
2011/11/26 10:02:47 1257 s waiting for local card init
2011/11/26 10:02:47 1260 h HTTP Server listening on port 16002
2011/11/26 10:02:47 1262 r03 Found reader with serial Reader AF7C08A at 003:002
2011/11/26 10:02:47 1262 r03 Found smartreader device Serial:Reader AF7C08A
2011/11/26 10:02:47 1261 r02 Found reader with serial Reader 7495AE2 at 002:002
2011/11/26 10:02:47 1261 r02 Found smartreader device Serial:Reader 7495AE2
2011/11/26 10:02:48 1261 r02 card detected
2011/11/26 10:02:48 1262 r03 card detected
2011/11/26 10:02:52 1262 r03 IO:SR: USB bulk read failed with error 1

2011/11/26 10:02:52 1262 r03 IO:SR: USB bulk read failed with error 1

2011/11/26 10:02:52 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:02:52 1261 r02 IO:SR: USB bulk read failed with error 1

2011/11/26 10:02:52 1261 r02 IO:SR: USB bulk read failed with error 1

2011/11/26 10:02:52 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:02:52 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:02:52 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:02:57 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:02:57 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:03:02 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:03:02 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:03:02 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:03:02 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:03:07 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:03:07 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:03:07 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:03:07 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:03:12 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:03:12 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:03:12 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:03:12 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:03:17 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:03:17 1262 r03 usb bulk write failed : ret = -1
2011/11/26 10:03:17 1262 r03 usb bulk write failed : ret = -1
2011/11/26 10:03:17 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:03:17 1261 r02 usb bulk write failed : ret = -1
2011/11/26 10:03:17 1261 r02 usb bulk write failed : ret = -1
2011/11/26 10:03:22 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:03:22 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:03:22 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:03:22 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:03:28 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:03:28 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:03:29 1262 r03 Error activating card.
2011/11/26 10:03:29 1261 r02 Error activating card.
2011/11/26 10:03:33 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:03:33 1261 r02 usb bulk write failed : ret = -99
2011/11/26 10:03:33 1262 r03 usb bulk write failed : ret = -99
2011/11/26 10:03:33 1261 r02 usb bulk write failed : ret = -99

Nov 26 10:02:47 SIEMENS CCcam: ======================================================================
Nov 26 10:02:47 SIEMENS CCcam: starting CCcam 2.1.3 compiled on Nov 14 2009@00:48:18
Nov 26 10:02:47 SIEMENS CCcam: ======================================================================
Nov 26 10:02:47 SIEMENS CCcam: online using nodeId f995f9a915eaf7fc
Nov 26 10:02:47 SIEMENS CCcam: create 1 cam device(s)
Nov 26 10:02:47 SIEMENS CCcam: added 74 keys from /var/keys/SoftCam.Key
Nov 26 10:02:47 SIEMENS CCcam: added 12 keys from /var/keys/AutoRoll.Key
Nov 26 10:02:47 SIEMENS CCcam: added 48 keys from /var/keys/constant.cw
Nov 26 10:02:47 SIEMENS CCcam: parsed 0 entries from /var/keys/CCcam.prio
Nov 26 10:02:47 SIEMENS CCcam: added 779 provider names from /var/keys/CCcam.providers
Nov 26 10:02:48 SIEMENS CCcam: added 11471 channel names from /var/keys/CCcam.channelinfo
Nov 26 10:02:48 SIEMENS CCcam: server started on port 12000
Nov 26 10:02:52 SIEMENS CCcam: login from 192.168.1.10
Nov 26 10:02:52 SIEMENS CCcam: user bert login attempt from 192.168.1.10
Nov 26 10:02:52 SIEMENS CCcam: client bert@89599f258d8a91ca, running CCcam 2.1.4
Nov 26 10:06:31 SIEMENS CCcam: newcamd server 127.0.0.1:34001 user: tester
Nov 26 10:06:31 SIEMENS CCcam: newcamd caid 1830 providers 0 userid: 0
Nov 26 10:06:31 SIEMENS CCcam: newcamd card serial: 00000000

[feissmaik]

mmh also mir sind da 2 möglicherweise 3 Lösungen bekannt; wobei meistens löst Punkt-2 das Problem


1.) Ins BIOS gehen und von USB2.0 auf USB1.1 (legacy) Support runterstellen (keine Sorge, wird nix langsamer)


2.) Den Kernel auf 2.6.26 wechseln.. Wie das geht steht >hier< ... evtl. ginge auch ein 2.6.32 Kernel allerdings als 486 und nicht 686!


und evtl. 3.) Das Smartreader-Protokoll benötigt die libusb Treiber: apt-get update && apt-get install libusb
..is aber unwarscheinlich das es dadurch gefixt wird...

Spoiler

Show

smartreader = libusb Treiber ( Smargo Settings auf AUTO )
smargo = ftdi Treiber ( Smargo Settings auf AUTO )
mouse = ?? ( Smargo Settings auf FIXED )

...generell würde ich dir aber auch noch empfehlen eine aktuelle OScam build oder rc zu nutzen
und cachedelay würd ich auf 0 stellen weil das addiert sonst zu jeder anfrage künstlich 120ms drauf
und saveinithistory auf 1 ... und mhz sowie cardmhz brauchste nicht angeben, ebenso wie caid und ident auch nicht - das findet der reader selber herraus


//EDIT: Kommt auch vor das ein USB-HUB diese Probleme verursacht aber an dem S300 müssten 4 USB-Ports sein also wenn dann lass den USB-HUB weg weil wäre mit nur 2 smargos eh blödsinn... Ich hab bei meinem 2 super-kurze (ca. 10cm lang) USB-Verlängerungen dafür genutzt